3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Installed broken09's urethane mounts!

Old Sep 16, 2005 | 09:39 AM
  #1  
2FAST7S's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
 
Joined: Oct 2001
Posts: 1,887
Likes: 1
From: Carmel, NY
Thumbs up Installed broken09's urethane mounts!

Bought them a while back but never got around to installing them 'till yesterday...
I guess first thing is if you have the same mounts on both sides will save you some work/time but either way its not that bad. I strongly recomend doing the swap at the same time youre changing your oil...I didnt and although i only lost about 1/3 of a quart or so it gets pretty messy!
Instructions were easy to follow and detailed enough...
I went ahead and changed them because after changing diffs and driving around again after a week i noticed the clank and the motor rocking back and forth a bit more than before. Sure enough, motor doesnt really move anymore and the clank is gone! I'm pretty happy with the mounts! The one and only drawback may be the vibration transfer(my idle is rough, i'm sure a bit of tuning would lessen that if not fix completly) and thats only at idle, once I get the revs up its not noticeable. Being stronger/stiffer than stock i'm sure they will last longer and put up with a lot more abuse...Very Good Product!!!! Props to Broken09 for offering an affordable alternative!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM
gabescanlon
Interior / Exterior / Audio
1
Aug 11, 2015 05:59 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:26 AM.