3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Injector upgrades

Old Jul 15, 2009 | 01:50 AM
  #1  
RotaryRocket93's Avatar
Thread Starter
Senior Member
iTrader: (7)
 
Joined: Oct 2008
Posts: 499
Likes: 0
From: Tallahassee, FL
Question Injector upgrades

At what point should I uprgrade my injectors? In about a month I plan on hooking up my new parts I ordered while on deployment. I have or will by then have.... Intakes/down pipe/high flow cat/ racing beat cat back/Power FC/Denso fuel pump. I just want to make sure that im not going to run to high of injector duty cycle. And if im correct its the secondary injectors that need to be replaced right?

Also anyone have any recommendation on what sized to go with or nay specific brand, this would be awesome. I plan on getting the Rx7 Extreme fuel kit in the future but im doing that when i upgrade to single turbo and get my engine rebuilt/ported. Thanks
Reply
Old Jul 15, 2009 | 03:04 AM
  #2  
RotaryRocket93's Avatar
Thread Starter
Senior Member
iTrader: (7)
 
Joined: Oct 2008
Posts: 499
Likes: 0
From: Tallahassee, FL
Anyone? All i know is that stock primaries are 550 and you dont want to change them because you will have a rough idle. and the stock secondaries are 850. I dont know if im better off going to 1300 or the 1600 injectors. I dont know what else i need to go with them or if they just plug right in and work... any help here would be awesome.
Reply
Old Jul 15, 2009 | 08:02 AM
  #3  
93vrfd_houston's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (10)
 
Joined: Apr 2006
Posts: 536
Likes: 0
From: houston, tx
what's up RR93, i just purchased a long list of items as well that i will be installing in sept. when i get to go home. i went with rc 1300cc secondaries and was informed that this should supply sufficient amount of fuel for my upgrades. i also purchased the bnr stage three turbos and plan on turning up the boost a lil bit. just to let you know what these should be able to support (as i have been informed) here is a list of my engine mods

bnr stage 3's, hks rs intake, ceramic coated uim/lim, smb down pipe, resonated mid pipe, apexi n1 duals, rc1300 secondaries, large smic, piping, and duct, rob baily's solenoids, koyo n flow radiator, samco hoses, greddy profec b spec II, hks twin power ign, and of course all new fluids and filters. i already have a pfc and commander.

don't know if this will help you out that much or not, but i thought it may give you an idea. i plan on running around 15-17lbs of boost.
Reply
Old Jul 15, 2009 | 08:21 AM
  #4  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by RotaryRocket93
At what point should I uprgrade my injectors?
Check this thread:

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-situation-do-you-have-259912/
Reply
Old Jul 15, 2009 | 01:43 PM
  #5  
WaachBack's Avatar
Finally Knows
Tenured Member: 20 Years
Liked
Loved
iTrader: (22)
 
Joined: Sep 2003
Posts: 1,108
Likes: 0
From: Hawaii
http://rx7.com/cgi-local/3rdgencalc.cgi
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
bryancmatthews
Power FC Forum
0
Sep 5, 2015 03:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:07 AM.