Im in a Pickle :/
#1
Full Member
Thread Starter
Join Date: Sep 2004
Location: indy
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Im in a Pickle :/
ok, do you guys think that the hks ti cat back will have to big of a piping(about 4 inch)??
is gonna be on a stock with the exception of radiator, guages, etc.
if i do deside to get it, what down and mid pipe is made in 4 in??
thanks in advance
-mike
is gonna be on a stock with the exception of radiator, guages, etc.
if i do deside to get it, what down and mid pipe is made in 4 in??
thanks in advance
-mike
#2
Senior Member
iTrader: (2)
Join Date: Oct 2003
Location: San Jose
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
The piping isn't too big if you have the engine built up and have the right mods. If you'r looking at the Titanium racing exhaust, it replaces the main cat and you won't be able to run it without any of mods, unless you want to invest in a new motor. You'll need an ECU to run it correctly and an aftermarket downpipe. May have to go with a custom one. IMHO I would get some other reliable mods and tuning before buying that.
#3
Senior Member
iTrader: (1)
There is really no point to getting exhaust with 4" piping on a stock car, but if you really want it, whatever. I don't know of any companies that make 4" downpipes or midpipes, you will probably have to get them custom-made. By the way, if you do get 4" full exhaust, expect to carry ear plugs in your car.
#4
Rotary Freak
Join Date: Sep 2004
Location: Bay Area, CA
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure it isn't just a 4 inch tip?
I don't know of any companies that make 4 inch downpipes or midpipes. I read another thread where someone asked what the largest downpipe available was and someone mentioned a 3.5 inch downpipe available, but I forget the vendor.
I don't know of any companies that make 4 inch downpipes or midpipes. I read another thread where someone asked what the largest downpipe available was and someone mentioned a 3.5 inch downpipe available, but I forget the vendor.
#5
Full Member
Thread Starter
Join Date: Sep 2004
Location: indy
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i guess it would be to big for a stock car. have you guys heard good things about the apexi n1 duals and the carbon ti hks?? like how good it sounds and looks.
-MIKE
-MIKE
#6
call me Smokie Smokerson
Join Date: Aug 2002
Location: Southern California
Posts: 1,665
Likes: 0
Received 0 Likes
on
0 Posts
http://www.rx7store.net/index.asp?Pa...ROD&ProdID=333
3" piping.
I don't think it's gonna look right on your civic though
3" piping.
I don't think it's gonna look right on your civic though
#7
Full Member
Thread Starter
Join Date: Sep 2004
Location: indy
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
its not for my EG, im just planning on the parts i would like to get when i finally deside on what fd to get. i just wanted to plan out a price list and all.
meh...
-mike
meh...
-mike
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post