Ignition Switch Harness
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: St. Simons Island, Georgia
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Ignition Switch Harness
Can someone verify I have the wires correct on this diagram. This is the harness that goes to the Ignition Switch (white plastic switch that often melts) in the steering column. The female harness melted beyond recognition and I wired it direct to the ignition switch. I had a few wires pull out of the connectors and I need to verify I have the wiring correct before I redo the wiring. Any help is appreciated.
Thanks
Thanks
#2
Classy
iTrader: (17)
image won't pop up...should be able to find this in the electrical FSM I think is connector x-03 you are referring to
Following the connector orientation of your pic...it should be:
Blue...................... Black/Blue
Blue/Black..................... Black/Green
Black/White..................... Black/Yellow
Following the connector orientation of your pic...it should be:
Blue...................... Black/Blue
Blue/Black..................... Black/Green
Black/White..................... Black/Yellow
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Vendor Classifieds
0
09-04-15 05:19 PM