If you could have any FD part made....
Higher quality interior parts for less money.
a sequential twin system with proper heat rejection capabilities and worked for more than a week.
front bumper caps that dont warp
stronger differential case
pillow ball mounts that last
new updated gauge clusters with 6 o clock tach in imperial and metric units with LED lighting and opening and closing ceremonies.
more robust transmission
relocated motor mounts that dont go through the oil pan
interior door panels that feel more sturdy
stronger front swat bar mounts
complete bolt in V-mount kit with parts and lines included to properly mover the AC condenser.
a sequential twin system with proper heat rejection capabilities and worked for more than a week.
front bumper caps that dont warp
stronger differential case
pillow ball mounts that last
new updated gauge clusters with 6 o clock tach in imperial and metric units with LED lighting and opening and closing ceremonies.
more robust transmission
relocated motor mounts that dont go through the oil pan
interior door panels that feel more sturdy
stronger front swat bar mounts
complete bolt in V-mount kit with parts and lines included to properly mover the AC condenser.
Joined: May 2005
Posts: 3,243
Likes: 42
From: Kennewick, Washington
Senior Member
Joined: Oct 2006
Posts: 352
Likes: 1
From: minot, ND
Full Member
Joined: Oct 2007
Posts: 104
Likes: 0
From: Edmonton
an aluminum interior panel to make the insides of the doors just flat,..
therefor eliminating the "Oh ****" bar,..
and relocating the power windows the the center console,
and the door handles to be electronic or something,...
I'ono...
that's probably just me.
therefor eliminating the "Oh ****" bar,..
and relocating the power windows the the center console,
and the door handles to be electronic or something,...
I'ono...
that's probably just me.
![gabe[7]'s Avatar](https://www.rx7club.com/customavatars/avatar97241_1.gif){kind=avatar}
1. high-flow SEQUENTIAL TT manifold
2. Good-looking OEM quality sleek lights
3. Replacement front ball joint retrofits
4. Carbon Fiber Sunroof* (*I may FINALLY have located a source for this)
2. Good-looking OEM quality sleek lights
3. Replacement front ball joint retrofits
4. Carbon Fiber Sunroof* (*I may FINALLY have located a source for this)
Lower Control Arm Front
Upper Control Arm front
Idler Pulley
Drop spindle Front
Drop spindle Rear
You can buy them through RHDJapan
Hope this helps,
Dan
Upper Control Arm front
Drop spindle Front
Drop spindle Rear
You can buy them through RHDJapan
Hope this helps,
Dan
Joined: May 2005
Posts: 3,243
Likes: 42
From: Kennewick, Washington
Expensive...
but I'm glad there are out there for the future.
Bell housing that would mate a Borg warner t56 transmission to a REW block
This would be a great piece (simple sand cast, 1 piece)
The t56 is a tough SOB
Rebuild kits are cheap & readily availiabe
Clutch would be converted to a push type (I'm pretty sure)
Oh yeah, it's a 6 speed...
A diff cradle, that would allow the use of a Quaife ATB diff. (simple tube frame fabrication) could double as a body brace as well. I think jimlab was working on something like this.
Billit drop spindles, those cast spindles mentioned aboved have failed in the past causing severe damage (Miata application)
This would be a great piece (simple sand cast, 1 piece)
The t56 is a tough SOB
Rebuild kits are cheap & readily availiabe
Clutch would be converted to a push type (I'm pretty sure)
Oh yeah, it's a 6 speed...
A diff cradle, that would allow the use of a Quaife ATB diff. (simple tube frame fabrication) could double as a body brace as well. I think jimlab was working on something like this.
Billit drop spindles, those cast spindles mentioned aboved have failed in the past causing severe damage (Miata application)
Best thing we could dream of is everything that exists at 10% of the actual price.
Probably in over my head
Joined: Feb 2006
Posts: 255
Likes: 0
From: salinas,ca
A set of HID projector headlights that work in the stock popups that are an actual upgrade in lighting and are a reasonable price. The only upgrades I see are sleek light kits, worse lighting, too expensive, completely custom work, or not even available.
I feel like there is some long history of fail attempts that I dont know about. I feel like there is a market for these but there is nothing. Anything?
I want one of these too.
I feel like there is some long history of fail attempts that I dont know about. I feel like there is a market for these but there is nothing. Anything?
I want one of these too.
Joined: Mar 2001
Posts: 30,817
Likes: 656
From: FL-->NJ/NYC again!
A set of HID projector headlights that work in the stock popups that are an actual upgrade in lighting and are a reasonable price. The only upgrades I see are sleek light kits, worse lighting, too expensive, completely custom work, or not even available.
I feel like there is some long history of fail attempts that I dont know about. I feel like there is a market for these but there is nothing. Anything?
I feel like there is some long history of fail attempts that I dont know about. I feel like there is a market for these but there is nothing. Anything?
https://www.rx7club.com/showthread.p...ight=catz+HIDs
(pics toward the bottom of the page)
