3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

idle sounds like bridge port

Thread Tools
 
Search this Thread
 
Old Mar 20, 2009 | 03:32 PM
  #1  
yourmom23's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2008
Posts: 588
Likes: 0
From: Montana
idle sounds like bridge port

Ok i am just wondering if i should be worried. My cars idle sounds kinda like a bridge port. It seems to run good, i havent got a chance to drive it yet since i am fixing my clutch right now.

I recently did a v mount, air pump elim, ported waste gate, turbo back exhaust, seq simplified, damions twin mbc setup, and a pettit ecu.

I hope someone can give me some insite to this, i dont know maybe its just because of the exhaust.

Oh and also my idle was actually a little higher after the air pump removal wierd
Reply
Old Mar 20, 2009 | 03:47 PM
  #2  
twomucboost4u's Avatar
Always Under Construction
Tenured Member 15 Years
iTrader: (9)
 
Joined: Oct 2005
Posts: 2,294
Likes: 24
From: San Jose
Check and make sure your Map sensor is hooked up correctly...

Chris
Reply
Old Mar 20, 2009 | 03:49 PM
  #3  
88verttop's Avatar
Full Member
 
Joined: Feb 2009
Posts: 60
Likes: 0
From: jeff city
where can i find an air pump elim?
Reply
Old Mar 20, 2009 | 04:05 PM
  #4  
asianricer69's Avatar
Junior Member
 
Joined: Nov 2007
Posts: 35
Likes: 0
From: mesa, arizona
it might just be the exhaust, test drive the car first and than see....
Reply
Old Mar 20, 2009 | 04:17 PM
  #5  
yourmom23's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2008
Posts: 588
Likes: 0
From: Montana
Ill check the map sensor.

It seems a little smother once it warms up, i dont know maybe i am just being parinoid, I have a way of over thinking stuff.
Reply
Old Mar 20, 2009 | 04:18 PM
  #6  
yourmom23's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2008
Posts: 588
Likes: 0
From: Montana
Originally Posted by 88verttop
where can i find an air pump elim?
Just search air pump removal you will find everything you need to know
Reply
Old Mar 20, 2009 | 04:26 PM
  #7  
TpCpLaYa's Avatar
T3DoW
Tenured Member 20 Years
iTrader: (10)
 
Joined: Nov 2001
Posts: 3,755
Likes: 5
From: Chicago - NW Burbs
mine runs really lumpy until warmed up too. Only difference is I'm on the stock ecu

you might just need to adjust the idle a little but I bet your fine and are in for one hell of a ride when you take it out for the first time

enjoy
Reply
Old Mar 20, 2009 | 04:32 PM
  #8  
yourmom23's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2008
Posts: 588
Likes: 0
From: Montana
Originally Posted by TpCpLaYa
mine runs really lumpy until warmed up too. Only difference is I'm on the stock ecu

you might just need to adjust the idle a little but I bet your fine and are in for one hell of a ride when you take it out for the first time

enjoy
lumpy yes that is what it sounds like! Ok good i was really starting to wonder.

Yeah i will have to adj the idle a little i spose, cant wait to rip on it, it was all stock before so here we go!!
Reply
Old Mar 21, 2009 | 05:32 PM
  #9  
88verttop's Avatar
Full Member
 
Joined: Feb 2009
Posts: 60
Likes: 0
From: jeff city
thanks!!!
Reply
Old Mar 21, 2009 | 07:41 PM
  #10  
Brian7's Avatar
'
Tenured Member 10 Years
 
Joined: Nov 2003
Posts: 380
Likes: 1
From: Home alone setting booby traps..
My old FD with those mods idled like a V8 with a crazy cam.

If it acts weird or it's down on boost, check the vacuum lines/piping.
Reply
Old Mar 21, 2009 | 07:54 PM
  #11  
yourmom23's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2008
Posts: 588
Likes: 0
From: Montana
Yeah i think it sounds pretty sweet, im sure its fine i am preety bad for double and triple checkin my vac lines. New clutch gets here on tues so i will find out.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
rx7brandon
General Rotary Tech Support
3
Aug 16, 2015 10:55 AM




All times are GMT -5. The time now is 08:20 PM.