muibubbles

iTrader: (36)

Im finally putting my car back together but i cant figure out where these plugs connect to.. can anyone provide assistance?

First, clear plug by dr side foot rest..


plugs behind gauge cluster, ive been looking around and i cannot find anyyything that it connects to......


help please?

cabaynes

iTrader: (4)

Dont those plugs behind the cluster, plug INTO the cluster?

muibubbles

iTrader: (36)

yeah i would think so too.......... but when i look behind the cluster the only plugs i see are for the headlight switch and little nonsense.....

Ernesto13B

iTrader: (4)

I have no idea what thats for but this will help you find out
http://pdftown.net/getfiles/181734

RLaoFD

iTrader: (6)

I can guarantee you that the ones you have shown plug into the gauge cluster. I've done about 5 R&R of my own cluster in the last 4 months can can tell you this for a fact.

MyRedFD

iTrader: (1)

If you hold up your gauge cluster to the dash it's pretty easy to figure out what plugs in where. They pretty much line up with where they plug in and can go in only one spot.

muibubbles

iTrader: (36)

thats what i thought, i checked 3 times... god i hope im not going blind.... will check AGAIN........ hope you guys are right, but then im going insane.....

RLaoFD

iTrader: (6)

I could understand how you think they are hard to spot, but just try to look for 5 rectangular shapes out of the back of the gauge cluster that is slightly indented and I'm sure you'll see.

badddrx7

iTrader: (7)

They are back there. Do not forct them in place, they easily snap in.


Later

BluRR

iTrader: (1)

Yes those go into the cluster...just look in the back of the cluster and and you will the indentations with the green circuit board tape thing going into the indentation

muibubbles

iTrader: (36)

that i def do recall. i remember seeing rectangular openings but they didnt look like female ends of the plugs.. i will take another look when im home this weekend.. i guess all the circuit board haywire camouflaged them in.. god i feel like such a noob, put the whole dash back in but couldnt figure out the gauge cluster LOL...


anyone know what the clip is for by the dr side foot rest?

ska*utomatic

iTrader: (3)

not sure from the pic can't see too well but if the driver side clear has three wires going to it and looks alot like the clutch switch, but isn't the one to the clutch switch. i've been wondering what this one is myself. It is not on my other 94 fd just on my 93 (both touring) if i have figured out which one it is in th shop manual it isn't even labeled in there as far as i can tell weird

muibubbles

iTrader: (36)

please help, got a few more.......
1


2

3


4

5

MOBEONER

iTrader: (18)

just cut them all off,who needs an extra clip or two laying around.....just kidding

badddrx7

iTrader: (7)

The white one is the oil level sensor and you've ripped the single wire out of it. Look for the single wire in the harness going to the starter.

Give wire colors with the connectors if you want quick answers Bubbles. Also your pics suck of course.

LAter

yourmom23

iTrader: (4)

1 goes to the ac
2 not sure
3 that goes to the sensor on top or the power steering
4 not sure looks like a signal light but looks like its coming from under the engine
5 goes to your cruise control

MAZMART

1. Fog lamps
2. Goes to the very same fuse block in the picture.
3. I know it, but it's slipping me.
4. Oil sender like ym23 said.
5. Cruise control actuator.

Paul.

badddrx7

iTrader: (7)

Hell, is everything in your car unplugged Bubbles ? Folks, you got to learn to document these things. A camera should be in your tool box next to the 3/8" rachet.



later

RLaoFD

iTrader: (6)

or at least some masking tape...

muibubbles

iTrader: (36)

no, but a lot of stuff was deleted when i bought the car... yes it was my fault for not documenting things better but when i pulled everything i originally was going lsx so didnt care where everything went... but the rotary bug bit me and i couldnt take the leap...........

and yes, i know my pictures suck, like always, its coming from my beat up "shop" camera which is filthy + my very poor photography skills.... and i will note color of wires next time... i wasnt smart enough to do that previously lol.......


1. Fog lamps or ac-either way both are delted.
2. Goes to the very same fuse block in the picture.AWESOME, after you said that it did seem familiar! plugged em in and my headlights started to work YAY! andddd the car is now cranking!!! hopefully she runs tomorrow!!!
3. that goes to the sensor on top or the power steering? if so thats deleted as well
4. Oil sender like ym23 said. "The white one is the oil level sensor and you've ripped the single wire out of it. Look for the single wire in the harness going to the starter."the wire i ripped out connects to the wire on the starter is a single wire with the red female end correct? but where do i connect the white one to?
5. Cruise control actuator.-deleted

thanks A TON for help!!

badddrx7

iTrader: (7)

4. Oil sender like ym23 said. "The white one is the oil level sensor and you've ripped the single wire out of it. Look for the single wire in the harness going to the starter."the wire i ripped out connects to the wire on the starter is a single wire with the red female end correct? but where do i connect the white one to?



you are looking for a BLUE wire that attaches to that white connector Bubbles. I do not see it in there. So search your starter harness for it. Correct me if I am wrong, on your white connector it apprears both the male and female sides are there. So where is the blue wire ?


Later

muibubbles

iTrader: (36)

so still having trouble with the oil pressure and oil level sensor... does anyone have pics of what it should look like?

sorry im a visual learner and have trouble comprehending things without pictures lol...

muibubbles

iTrader: (36)

bumppp can anyone help me figure out how to connect my oil press and oil level connectors?

i know where the oil pressure sender is, but idk what the connector looks like. infact i think the it broke off... what color wire should i be looking for?

oil level- as pictured as number 4.... the connector is no longer connected and is just a wire now, will still be able us it or do i need that wire connector?

the only visible wire i see is a blue wire but i cant make out what else is on it..

any help?