I wanna see FLAMESSSSSSs!
#1
*** Bless Texas!
Thread Starter
Join Date: Jan 2002
Location: TX
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
I wanna see FLAMESSSSSSs!
I want to see flames but i don't want to get a mid-pipe because the unstability of boost spiking. I have a profec b but i heard its still real hard to control with a mid-pipe. Could I get a high flow cat and what else would I need to shoot the flamage.
Thanks
Hey don't flame me about wanting to see flames shoot out my exhuast just for looks. You know you want that too!
Thanks
Hey don't flame me about wanting to see flames shoot out my exhuast just for looks. You know you want that too!
#3
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
You can't really do it with a cat in there, period. Now I don't know what exactly makes a high-flow cat a high-flow cat, but I'm still guessing that all exhaust passes through and is screened in the cat. This would prevent flames from passing through. If it would allow flames, it would be very minimal ... but since I don't know the details of high-flow cats I don't want to rule it out.
So you can be ghetto and do the sparkplug thing behind the cat and see if you can ignite the exhaust after the cat.
So you can be ghetto and do the sparkplug thing behind the cat and see if you can ignite the exhaust after the cat.
#5
Junior Member
Join Date: Apr 2001
Location: Gaffney, SC Cherokee
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
3 footer
I shoot some wicked flames. Even shifting moderately at 4-5,000 RPMs it can throw out a decent flame. The flames have brought me fame in my city har har
Anyways this is my setup, its relatively cheap:
Intake
Full 3" exhaust with Apexi N1 single (good luck on flames with a cat)
G-Force ECU, which is programmed fairly rich
street port
I have other mods but i doubt they're related to shooting flames.
Basically a full exhaust and a rich computer will do the trick everytime. It's better to be rich than lean in an RX-7. BE SURE you at least have a boost controller if you install a midpipe.... O yea, and be ready to wear ear-plugs
Anyways this is my setup, its relatively cheap:
Intake
Full 3" exhaust with Apexi N1 single (good luck on flames with a cat)
G-Force ECU, which is programmed fairly rich
street port
I have other mods but i doubt they're related to shooting flames.
Basically a full exhaust and a rich computer will do the trick everytime. It's better to be rich than lean in an RX-7. BE SURE you at least have a boost controller if you install a midpipe.... O yea, and be ready to wear ear-plugs
#6
You can have massive flames shooting out the back for under 10$
Simply drill a small hole towards the end of your exhaust and insert a spark plug, wire it to a switch.
Flip the switch and watch the flames shoot out and cook the car behind you.
I haven't tried this yet, but have read a few places on the theory of getting to work.
Simply drill a small hole towards the end of your exhaust and insert a spark plug, wire it to a switch.
Flip the switch and watch the flames shoot out and cook the car behind you.
I haven't tried this yet, but have read a few places on the theory of getting to work.
#7
Accepting Donations.
Join Date: Mar 2001
Location: San Francisco, Ca.
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
you have an rx-7!!!!! do not do the ghetto spark plug thing, that is for incompetent cars like your moms daewoo. you do not have a lame car, you can shoot flames easily if you want to.
if you want to shoot flames, just get full exhaust and run a richer ecu, then rev it high and POP! you have a flame.
oh yeah, and you cant do it with a catalyst in place because it cockblocks your flames.
have fun.
if you want to shoot flames, just get full exhaust and run a richer ecu, then rev it high and POP! you have a flame.
oh yeah, and you cant do it with a catalyst in place because it cockblocks your flames.
have fun.
Trending Topics
#9
Sua Sponte
iTrader: (31)
I know a guy in knoxville that has the spark plug thing hooked up in his supra. It shoots some hella flames. Flames way bigger then any car can shoot running rich. I've heard he does it when ppl cut him off....he then proceeds to pull in the next lane a little ahead of them, flip the switch, and scare the other driver to death.......the other driver then pulls over and checks their shorts. I wouldn't do it to my car, but I do think it looks cool......plus it's completely controlled. Just my $.02
Memphis
Memphis
#12
I'm a CF and poop smith
you also forgot to mention that you need a coil as well, the old muscle car guys use to do this trick except that they could do it easier cuz they actually sell kits for this application. only thing is that their kits are only designed for carbarated (spelling is off) cars. it does pretty much what the motorcycle guys do, it cuts the ignition and then turns it back on, the longer it is shut off, the bigger the flames, this cant work on efi cars though. i was wondering if anyone had a superafc out there and actually tried doing this? oh well good luck
#14
Senior Member
Join Date: Oct 2001
Location: Washington, DC
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Re: I wanna see FLAMESSSSSSs!
Originally posted by Street King
I want to see flames but i don't want to get a mid-pipe because the unstability of boost spiking. I have a profec b but i heard its still real hard to control with a mid-pipe.
I want to see flames but i don't want to get a mid-pipe because the unstability of boost spiking. I have a profec b but i heard its still real hard to control with a mid-pipe.
Later,
Scott
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
86rxNa
2nd Generation Specific (1986-1992)
2
08-11-15 11:51 AM