3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

HP for Auto

Thread Tools
 
Search this Thread
 
Old Mar 5, 2002 | 11:32 PM
  #1  
ar_x's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2002
Posts: 9
Likes: 0
From: California
HP for Auto

I was just wondering if you could tell me about how much HP would be needed to drop the time on automatic FD about 1 sec? Or Mods? Don't know, just curious.
Thanks
Reply
Old Mar 6, 2002 | 01:15 AM
  #2  
djantlive's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 1,213
Likes: 0
I'm guessing that you'll need something comparable to M2's stage 2 mod. Check out m2performance.com for approx cost and hp and mod list.
Reply
Old Mar 6, 2002 | 10:10 AM
  #3  
maxpesce's Avatar
Ex fd *****
Tenured Member 15 Years
 
Joined: May 2001
Posts: 1,782
Likes: 1
From: Ventura CA USA
Im Guessing A DP, Catback and Open intake - any thing you can do to get the Turbos to spool up faster - The first gear overall ratio is much taller than the 5 speed so you don't build rpms nearly as quickly on the launch. The advantage comes on the 1-2 & 2-3 upshifts, the AUTO maintains boost better during the shifts

Last edited by maxpesce; Mar 6, 2002 at 10:15 AM.
Reply
Old Mar 6, 2002 | 12:36 PM
  #4  
Cincy7's Avatar
Full Member
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 150
Likes: 8
From: Santa Fe, NM
The standard mods will work, as noted above. However, if the car is not a daily driver and you plan on doing alot of 1/4's, consider replacing the 3.91 to a 4.77 rear.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jetlag
3rd Generation Specific (1993-2002)
4
Sep 29, 2015 06:52 AM




All times are GMT -5. The time now is 11:16 AM.