3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

how to replace amber side markers

Old Jun 15, 2002 | 01:05 AM
  #1  
alaskan7's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: May 2001
Posts: 104
Likes: 0
From: Anchorage Alaska
how to replace amber side markers

how do you get into the amber front side markers next to the front wheel?
Reply
Old Jun 15, 2002 | 01:18 AM
  #2  
Johnny's Avatar
OG
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 1,291
Likes: 1
From: Pleasanton,California
what ever you do..dont listen to the manual..they do not show a screw holding it in place...

remove the front turn signals...so you can push them out from there....have you wife or girlfriend do it if you have large hands...

to excess the screw that hold them on I removed the front wheels and pulled out part of the wheel well covering to acess the screw. I have 18 inch wheels and I'm pretty low....should be able to do it just by jacking the car up
Reply
Old Jun 15, 2002 | 02:11 AM
  #3  
alaskan7's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: May 2001
Posts: 104
Likes: 0
From: Anchorage Alaska
worked, thanks a lot

I ended up just turning the wheels to full lock and prying back the wheel well a little
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tsmith94FD
3rd Generation Specific (1993-2002)
4
Aug 16, 2015 05:41 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:05 AM.