How to linearize stock water temp?
Senior Member
Joined: Feb 2001
Posts: 464
Likes: 0
From: Was SoCal
I just went to the following link and it worked fine for me:
http://www.geocities.com/MotorCity/G...technical.html
http://www.geocities.com/MotorCity/G...technical.html
Senior Member
Joined: Nov 2001
Posts: 674
Likes: 0
From: Lynchburg, VA
I recently did this MOD. not the temp gauge just barely moves when the engine is at normal operating temp 86C
I haven't heated it up at all so the higest I have seen it the low mark on teh stock gauge. any of you that tried this mod have the same results? Even with the gauge reading so low, I like that I can trust it.
If I even see it jusm up to the middle of normal or even close, Ill be checking the PFC and switching the fans on.
I haven't heated it up at all so the higest I have seen it the low mark on teh stock gauge. any of you that tried this mod have the same results? Even with the gauge reading so low, I like that I can trust it.
If I even see it jusm up to the middle of normal or even close, Ill be checking the PFC and switching the fans on.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM
