hi,
with my single turbo mod there are some water hose that needed to block.is there another way to block these instead this way in this pic?
i think it is a bit rediculus.

there is a small length of tubing atached to the hose on the waterpump needed block-off and in the other end there is a bolt inserted in the tubing and then the metal ring over.

thanks

 

You can do as they have done in the pic, weld up the unused passages, or loop the passages together. Its obviously going to look the best if cut and welded shut.

 

another option is to thread the holes with a 1/4 npt tapp and use an aluminum plug w/sealer on it. this is something anyone can do with basic hand tools and a $10 tapp from sear's or home depot.