I'm getting ready to purchase a couple boost controllers for my car. Gonna use a Greddy TVVC manual controller for the PCA, and a Blitz SBC Spec S for the wastegate.
My question is... the Spec S is a dual solonoid controller, but I'm only going to use one. So is it alright to just put a plug on one of the outlets of the solonoid?

Will this setup function properly?


Thanks
Chuck

 

ttt

 

anybody?

 

why not just be normal and get a profec b like everyone else? it has been proven to work

BTW if I knew the answer to your question I would help instead of being a pain.

 

What are you trying to accomplish with this setup. Are you trying to achieve 14psi on the primary and 14psi on the secondary or what? I believe someone has already tried that and they could get was 12.5psi on the primary. Are you trying to control your boost spikes? If thats the case then buy the Blitz Sbc-id. It has two solinoids and in the programing you can adjust how fast the wastegate opens giving you more or less boost spike. Don't complicate the system too much. Hope this sheds a little light on the issue.

R.K.

 

Somebody told me the Profec B only controls the secondary wastegate, and to use a manual controller on the pca.... Is that incorrect? Makes sense, and no reason it wouldn't work in my opinion. Am I wrong?

Thanks
Chuck