Find me the link where people have mounted their HKS Twin Power Units please!?

-Jeff

 

Why don't you just ask where people mounted their Twin Power units?

I mounted mine on the driver side of my engine bay, here's some pics:





Now, whether or not that is a good spot to place the ground... I don't know. Thats just where I stuck it and I have not really noticed any problems. I would love some feedback from the older and wiser owners on that one...


(some modification to the HKS unit was required to fit it here... nothing painful though)

 

I mounted mine on the driver-side front frame rail. Best spot I've found...

 

Let's follow the forum conduct rules:

 

HAHA! Sorry...

 

Mine is mounted in the same spot. The only modification was to make the mounting hole larger.

I put the ground wire on another screw on the front side of the shock tower.

 

I mounted mine on the upper intake in the back on the passenger side. There are picts in the single turbo section in my single set up.

 

I ended up going a different route. I wanted it as far away from heat as possible, and keeping the wiring kind of stealthy. I wrapped the harness with some rubber stuff I had laying around in the garage. I relocated the cruise control harness plug thing to under the twin power so I can use the hole that the harness was mounted to. I grounded the twin power with one of the bolts to the igniter. Pretty easy!

Here are pictures!

 

nice i did secound pic setup

 

check out my thread you will see 2 different locations

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/engine-started-first-try-yes-some-new-stuff-too-745676/

 

nice atach your pics to the thread

 

Before


After

 

why the location change!??? im moveing mine to location of your first pic!!!

 

he has relocated coils. Any chance we can get detailed pictures of the relocation of the coils? I've always wanted to do it.