RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   HKS Twin Power mounting locations (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/hks-twin-power-mounting-locations-711258/)

TRISPEEDFD3S 12-08-07 04:31 AM

HKS Twin Power mounting locations
 
Find me the link where people have mounted their HKS Twin Power Units please!?

-Jeff

fendamonky 12-08-07 04:55 AM

Why don't you just ask where people mounted their Twin Power units?

I mounted mine on the driver side of my engine bay, here's some pics:

http://i60.photobucket.com/albums/h3...inPower001.jpg

http://i60.photobucket.com/albums/h3...inPower003.jpg

Now, whether or not that is a good spot to place the ground... I don't know. Thats just where I stuck it and I have not really noticed any problems. I would love some feedback from the older and wiser owners on that one...


(some modification to the HKS unit was required to fit it here... nothing painful though)

str8ryd 12-08-07 07:05 AM

I mounted mine on the driver-side front frame rail. Best spot I've found...

Mahjik 12-08-07 08:10 AM

Let's follow the forum conduct rules:


11. Do not post a thread solely aimed at getting the attention of another forum member (i.e. posting ATTENTION FRED SMITH!) The forum provides a private messaging system for contacting individual forum members.

TRISPEEDFD3S 12-08-07 11:59 AM

HAHA! Sorry...

jkstill 12-08-07 12:57 PM


Originally Posted by fendamonky (Post 7600071)

I mounted mine on the driver side of my engine bay, here's some pics:

(some modification to the HKS unit was required to fit it here... nothing painful though)

Mine is mounted in the same spot. The only modification was to make the mounting hole larger.

I put the ground wire on another screw on the front side of the shock tower.

Busted7 12-08-07 01:05 PM

I mounted mine on the upper intake in the back on the passenger side. There are picts in the single turbo section in my single set up.

TRISPEEDFD3S 12-08-07 05:01 PM

I ended up going a different route. I wanted it as far away from heat as possible, and keeping the wiring kind of stealthy. I wrapped the harness with some rubber stuff I had laying around in the garage. I relocated the cruise control harness plug thing to under the twin power so I can use the hole that the harness was mounted to. I grounded the twin power with one of the bolts to the igniter. Pretty easy!

Here are pictures!

http://i28.photobucket.com/albums/c2...S/100_1982.jpg

http://i28.photobucket.com/albums/c2...S/100_1983.jpg

http://i28.photobucket.com/albums/c2...S/100_1984.jpg

http://i28.photobucket.com/albums/c2...S/100_1985.jpg

http://i28.photobucket.com/albums/c2...S/100_1986.jpg

MAZDASPEED08 04-09-08 04:39 PM

nice i did secound pic setup

KaiFD3S 04-09-08 05:09 PM

check out my thread you will see 2 different locations

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/engine-started-first-try-yes-some-new-stuff-too-745676/

MAZDASPEED08 04-09-08 05:16 PM

nice atach your pics to the thread

KaiFD3S 04-09-08 05:26 PM

Before
http://img.photobucket.com/albums/v2...icture-017.jpg

After
http://img.photobucket.com/albums/v2...S/DSC_0055.jpg

MAZDASPEED08 04-10-08 08:52 AM



why the location change!??? im moveing mine to location of your first pic!!!

Aeka GSR 04-10-08 09:49 AM

he has relocated coils. Any chance we can get detailed pictures of the relocation of the coils? I've always wanted to do it.


All times are GMT -5. The time now is 11:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands