HKS intercooler and PS eliminator loop install pics
Thread Starter
Junior Member
Joined: Jun 2001
Posts: 15
Likes: 0
HKS intercooler and PS eliminator loop install pics
At http://www.gonesilent.com/~gene/fd/ic are pics of the installed HKS RZ013 intercooler and home-rigged power steering eliminator loop.
The intercooler fitment is fairly poor, and several brackets still need to be fabricated to hold everything in properly. The kit was mostly complete. There is no provision for the factory AST. It should have everything to relocate AC and PS, but I don't have those systems, so I don't know for certain.
Battery hold-down for small battery was made with 1/4" stainless all-thread and steel channel.
PS eliminator was some Earl's fittings and about 6 inches of No. 6 line.
Gene
The intercooler fitment is fairly poor, and several brackets still need to be fabricated to hold everything in properly. The kit was mostly complete. There is no provision for the factory AST. It should have everything to relocate AC and PS, but I don't have those systems, so I don't know for certain.
Battery hold-down for small battery was made with 1/4" stainless all-thread and steel channel.
PS eliminator was some Earl's fittings and about 6 inches of No. 6 line.
Gene
Thread
Thread Starter
Forum
Replies
Last Post
