3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help! where does this wire go?

Thread Tools
 
Search this Thread
 
Old Aug 31, 2009 | 08:33 PM
  #1  
Heavyfoot's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Jan 2008
Posts: 49
Likes: 0
From: US
Help! where does this wire go?

Ok, so ive been having some starting issues, sometimes my car would automatically start up some times it needs a few (some times more than a few) clicks before it would turn over. So I decided to purchase Pettit Racings Starter Booster. In my process of hooking up the Starter Booster i found a wire that was disconnected and looks like it broke off somewhere. The wire is red and white and is connected to the wire loom with the 2 starter wires, but its going in a different direction from the starter wires. The Starter Booster fixed the starting issue but i still wanna know where this red and white wire goes to.
Thanks for any help

The red and white wire is circled

Reply
Old Aug 31, 2009 | 08:46 PM
  #2  
FixableUnknown's Avatar
Where does this bolt go?
Tenured Member 05 Years
iTrader: (8)
 
Joined: Oct 2008
Posts: 315
Likes: 0
From: TN
The only single wire sensors on that side are the temp sender, coolant level, oil level. I may be missing others but that is all I can think of. Did this come from the engine charging harness?
Reply
Old Aug 31, 2009 | 08:54 PM
  #3  
Heavyfoot's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Jan 2008
Posts: 49
Likes: 0
From: US
not sure what you mean but its coming from the wire harness that has the 2 starter wires.
Reply
Old Aug 31, 2009 | 11:15 PM
  #4  
RotorDream's Avatar
Rotary Ninja
 
Joined: Oct 2007
Posts: 683
Likes: 0
From: Wichita Falls, TX
What year is your FD? Also no offense, but the Pettit starter booster is a waste, built my own with about $15 worth of parts from Advance, and about 10minutes.
Reply
Old Aug 31, 2009 | 11:37 PM
  #5  
FixableUnknown's Avatar
Where does this bolt go?
Tenured Member 05 Years
iTrader: (8)
 
Joined: Oct 2008
Posts: 315
Likes: 0
From: TN
Try this link. It has the factory electrical manual. It gives wire location and colors.http://www.wrex-racing.com/web/fd/info.htm
Reply
Old Aug 31, 2009 | 11:52 PM
  #6  
RotorDream's Avatar
Rotary Ninja
 
Joined: Oct 2007
Posts: 683
Likes: 0
From: Wichita Falls, TX
That will work provided he has a 94, since that is the only electrical manual available on that site. I on the other hand have wiring diagrams for 93, 94 and 95, and that is why I was asking what year he has.
Reply
Old Sep 1, 2009 | 12:33 AM
  #7  
Dudemaaanownsanrx7's Avatar
wannaspeed.com
Tenured Member 20 Years
iTrader: (23)
 
Joined: Feb 2003
Posts: 2,802
Likes: 5
From: Texas
The manuals really shouldn't be too much different. Most everything is the same between the years. I have a 93 but use the 94 manuals and haven't had any problems. Though I haven't had to use them much.
Reply
Old Sep 1, 2009 | 12:36 AM
  #8  
RotorDream's Avatar
Rotary Ninja
 
Joined: Oct 2007
Posts: 683
Likes: 0
From: Wichita Falls, TX
I have run into a few minor problems between the year models, but mostly minor things. the pinouts are the almost exactly the same, but a few wire colors are different. The 93-94 and 94-95 differences aren't as big as the 93-95 differences.
Reply
Old Sep 1, 2009 | 05:16 AM
  #9  
Heavyfoot's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Jan 2008
Posts: 49
Likes: 0
From: US
its a 93 auto
Reply
Old Sep 1, 2009 | 01:10 PM
  #10  
Heavyfoot's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Jan 2008
Posts: 49
Likes: 0
From: US
nevermind its the oil pressure sensor wire, thanks though
Reply
Old Sep 1, 2009 | 01:13 PM
  #11  
RotorDream's Avatar
Rotary Ninja
 
Joined: Oct 2007
Posts: 683
Likes: 0
From: Wichita Falls, TX
Really? that short and all the way down there? dang!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
DocHoliday89
3rd Generation Specific (1993-2002)
5
Oct 12, 2015 07:42 PM
FC3S_nataku
2nd Generation Specific (1986-1992)
4
Sep 15, 2015 12:36 PM
cosmo7
West RX-7 Forum
2
Sep 14, 2015 09:47 PM




All times are GMT -5. The time now is 01:03 AM.