Help where do these grounds go
#1
Help where do these ends go?
Hi finalizing my build and i am confused on where these last 2 cables go. One is a loose wire and appears to be maybe a ground and the other comes from the harness.
I also accidentally had them connected to my positive terminal (opposite side of the 2 hole plate) and blew my 120amp fuse. Any suggestions on what else i should inspect as a result of my incompetence.
I also accidentally had them connected to my positive terminal (opposite side of the 2 hole plate) and blew my 120amp fuse. Any suggestions on what else i should inspect as a result of my incompetence.
Last edited by SavFD3s; 12-18-18 at 08:14 PM.
#2
Frequent Tool Misplacer
iTrader: (1)
I think those lugs should be attached to the two bolts on your fusebox, you can see the bolts on the left side of your photo. Is that what you said you tried and blew the fuse? I tracked mine down, and it really does look like that should be it...
(lugs secured by fusebox bolts)
(lugs secured by fusebox bolts)
#3
I think those lugs should be attached to the two bolts on your fusebox, you can see the bolts on the left side of your photo. Is that what you said you tried and blew the fuse? I tracked mine down, and it really does look like that should be it...
(lugs secured by fusebox bolts)
(lugs secured by fusebox bolts)
Thread
Thread Starter
Forum
Replies
Last Post
racatech
2nd Generation Specific (1986-1992)
4
12-15-05 11:28 PM
SaabGuy
2nd Generation Specific (1986-1992)
5
12-21-01 08:33 AM
asherwood
2nd Generation Specific (1986-1992)
3
12-20-01 04:18 PM