Recommended locations for "extra' grounds?
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2001
Location: Victoria, BC, Canada
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Recommended locations for "extra' grounds?
I'm thinking of adding some extra ground wires to my '91 N/A and would like some feedback on how effective this has proved to be and where the most beneficial locations are?
I'm likely going to use 8 gauge wire, should I replace the stock battery
post connectors as part of this process as well?
Thanks
I'm likely going to use 8 gauge wire, should I replace the stock battery
post connectors as part of this process as well?
Thanks
Last edited by asherwood; 12-20-01 at 12:25 PM.
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
http://home.earthlink.net/~burntoast/3700.html or http://www.rx7forum.com/showthread.p...hlight=grounds
Last edited by HAILERS; 12-20-01 at 12:35 PM.
#3
Eggs are like fowl cheese
Join Date: Mar 2001
Location: Daniel Island, SC
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
I ran a very thick wire from the battery to the waterpump, them from the same location on the water pump to the firewall. I also ran a ground from the boost sensor to the same waterpump location.
The wire I used was thick starter cables and from the boost sensor, jut a 14 gauge wire.
The wire I used was thick starter cables and from the boost sensor, jut a 14 gauge wire.