Hey guys what is this asjusting screw for and also how do you set it to specs? The adjusting screw is right by the intake elbow at the bottom towards the back. Thanks let me know

 

some one must know.

 

bump

 

Isn't that the thermo wax thingy? I don't beleive that needs to be adjusted. There are two idle adjustements and one for the TPS. Be careful with that harness plug, if it gets broken or wires break on it then the car will run like poopoo.

 

That's the fast idle cam adjustment. Turning the screw in decreases the amount of time the fast idle cam is engaged. I'm sure there is a description of proper adjustment in the FSM.

 

Take it off and through it away.

 

But wont I need to block the hole it in some way and how would I go about removing it completely.

 

http://robrobinette.com/throttle_body_coolant.htm

 

Thanks but it don't really show how to completely remove it.

 

Why don't you download one of the online Mazda manuals and read section F.