Help with the Rotary Extreme Head light kit..
#1
Help with the Rotary Extreme Head light kit..
Ok,
I have the lights in place but I'm slightly confused about the 4 brackets that came with the kit.
These are the metal brackets for the FG housings.
I figured out about the 2 that mounts to the side of the housing but not sure about the other two. Can someone point me in the right direction.
YES! I've searched the forum and checked the RE site installation instruction.
I have the lights in place but I'm slightly confused about the 4 brackets that came with the kit.
These are the metal brackets for the FG housings.
I figured out about the 2 that mounts to the side of the housing but not sure about the other two. Can someone point me in the right direction.
YES! I've searched the forum and checked the RE site installation instruction.
#3
www.mancavecolorado.com
To make it fit right...your going to have to cut a lot more metal then the instructions state and make new brackets to keep the integrity of the vehicle. You will also probably have to sand the housings to allow it to fit.
#4
SINFUL7
iTrader: (37)
Originally Posted by MichaelB145
To make it fit right...your going to have to cut a lot more metal then the instructions state and make new brackets to keep the integrity of the vehicle. You will also probably have to sand the housings to allow it to fit.
#5
Originally Posted by KaiFD3S
I think you might be talking about the other two that mount to the last screw of the fender closes to the light, 2 bolts to the housing and 1 bolt to the fender screw
Thats it!!
Do you happen to have some pics of that?? Also, do you have to take the bumper off to do this?
I've already cut, painted the housing, etc. Just need to install the housings.
Trending Topics
#8
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
Take the bracket and the bolts out to the driveway and let big John beat them with a large hammer then give them to Brian to weld together in one small lump .Bring the lump to Murfreesboro for Jeremy to polish . Them we will all go to the cruise in and out to eat .Good deal,,, see you Friday . The Gar .
#9
www.mancavecolorado.com
Originally Posted by KaiFD3S
thats weird I did not have to sand my housing at all or need to make any brackets...mine fit perfectly...
#10
Senior Member
iTrader: (8)
Join Date: Mar 2005
Location: north ca
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
can see anything in the pix
Kai fd3s have the n1 hood and look like it fit very good
Kai fd3s have the n1 hood and look like it fit very good
Originally Posted by MichaelB145
I wonder if they don't fit well with the N1 hood. Lupe said he had to sand as well. Heres a picture of what it looks like so far.
Last edited by speedsilver7; 10-03-05 at 11:45 PM.
#20
Banned. I got OWNED!!!
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
I had to trim my hood a little from my screw up, not Chucks. I installed my lexan covers too far to the inside.
I don't blaim Chuck for wanting to get out of the business. I would too if I had all the groupie lynch mobs tracking my every move down.
Chuck treated me great over the years.
I don't blaim Chuck for wanting to get out of the business. I would too if I had all the groupie lynch mobs tracking my every move down.
Chuck treated me great over the years.
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM