help putting fd back together :/

Reply Subscribe

Thread Tools

Search this Thread

Dec 4, 2011 | 11:57 PM

#26

twinsinside

Rotary Enthusiast

iTrader: (34)

Joined: Apr 2009

Posts: 771

Likes: 0

From: japan

For the clutch pop off the inspection covers. Make sure the slave cylinder head is seated correctly on the fork. If it wasn't, it probably popped off when you pushed the clutch pedal.

If it is seated on the clutch fork, see if you can move the fork and check to make sure that it is engaged. Most commonly the wire retaining ring might not be grabbing on. That $3 part can be a real pisser sometimes.

Dec 5, 2011 | 05:53 AM

#27

allrotor93

Lives on the Forum

iTrader: (126)

Joined: Jul 2001

Posts: 6,703

Likes: 3

From: Cary, NC

If I am talking about the same pipe

The big one from back of intake connects to your intake elbow

Dec 8, 2011 | 05:12 PM

#28

superfd3s

Full Member

iTrader: (7)

Joined: May 2010

Posts: 59

Likes: 0

From: san diego

How did you install the complete engine thru the top or under with the cradle off?

thanks in advance.

Dec 8, 2011 | 07:16 PM

#29

hiboost

Serbian

iTrader: (1)

Joined: Nov 2006

Posts: 246

Likes: 0

From: phoenix

Quote:

Originally Posted by tytemf5

Hey guys finally started the car yesterday! Only for 15 sec max though- one of the oil cooler lines wasnt tight and was spitting oil so I had to shut her off. Fixed it, and tried to start her again, but I guess I flooded the engine so I ended for the day. A few questions though. 1. I changed my slave cylinder, bled it, but there is still no pressure on my clutch pedal

any ideas for this? Also, my intake is the apexi intakes, there is one line that is still open. I also have the air pump line open(coming from the back of the air pump) and the big line open from the back of the lim. Anyone have a hose diagram for this? I have 3 open lines, do not know where they connect to :/

Send me your email and I'll send you the Manual. It has all the connections you need.
You will have to do search thru it a bit, but I'm sure you will find what you are looking for. You will learn patience with this car

...

Dec 9, 2011 | 02:31 AM

#30

tytemf5

Thread Starter

grease monkey

iTrader: (9)

Joined: Jul 2004

Posts: 213

Likes: 1

From: atlanta, ga

super, i installed it from the top. hiboost, my email is myfonti@gmail.com.
i will work on my car tomorrow after class and will take pics to show you guys what i am talking about.