ANY one how do you mount the radiator,the condensor and where does the p/s steering hose hook up at.
Thank You

 

If you got the complete kit, there should have been provided brackets for relocating the a/c condenser & radiator. The rad has to be stood up almost vertically, & the condenser has to be laid almost horizontally (front end tilted up slightly). I take it you didn't get any instructions, so it may be a bit tedoius figuring where each bracket goes. Also, when done, you have to mount one or two 10" aux electric fans on the condenser to maintain any kind of a/c when the car isn't moving.

As for the p/s line, did you get one with the kit? It should directly replace the stock one. Another couple of small brackets (more like aluminum strips) secures the line to the two rearmost bolts that hold on the plastic undertray.

 

Let me guess...You didnt get directions!

If you give me your email address, I can send you some pics of my install....

 

i have the actual directions(w/pics) in japanese and english. i can mail them to you if you want em.

 

For some reason Greddy does not pack instructions with their intercooler kits anymore.

Im going to put them in PDF format and post a link on the forum.

Jason

 

Did that PDF file get posted? I am at the same stage with all the brackets...but I don't have AC any more...
(I know these are old threads but I have been looking at them all for the instructions.)
I don't have a fax machine...

 

what are you having a problem with david? the instilation is actualy quite easy. there is a thread w/ direction for the 2row on here somewhere....i forget who did the writeup, i never bothered to read it, bu i know it helped others out.

 

cool, I will try to find that one...
I just didn't know what all the brackets are for, and how the 'S' pipe replaces the original one...it seems that no matter how I rotate it, it just doesn't have the ends pointing in the correct directions...

 

Dave,
If you dont have the AC then you wont be using most of the brakets. The only ones you will use are for the radiator feet. They have holes in them. There is a good pic in the instructions.

Jason

 

incase anyone is looking for this info... here is the link that seems to explain the install pretty well.
http://flathat.woodstream.net/RX7/Docs/Greddy_FMIC.html
Cheers

 

I never used the supplied P/S-line, made the whole thing fit with the stock one.

 

I can't figure out how the P/S pipe replaces the factory one (yes I want to keep power steering)...anyone have a tip/picture?
Thanks
-D