3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

help please, Engine idle funny

Old May 1, 2002 | 11:22 AM
  #1  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 73
Likes: 0
From: Minneapolis
Unhappy help please, Engine idle funny

I am new to here, I got my 7 about 5 month ago.
Starting 2 days ago, I leave the clutch pushed and put it in first gear, If I don't step on the gas, then my car just keep idle really low( between 1000 to 200 rpm), like it is going to shut off any time (I didn't release the clutch yet, just keep it puched all the way). But if I let the cultch go and leave it in Neutrual, then it is idle about 1500 rpm, like it is normally does. Does anyone know why it is doing that?

Does it mean I have a leak in the Vacumm H, or my trasmittion is about to be gone? I know that I have a small leak in the tranny, but it shouldn't matter too much, rite?

Thanks for all the help!!!!!
Reply
Old May 1, 2002 | 11:28 AM
  #2  
Bucrx7's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 724
Likes: 0
From: Massachusetts
Sounds like a bad clutch switch.
Reply
Old May 1, 2002 | 02:47 PM
  #3  
redrotaryrock8's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 215
Likes: 0
From: boston
yup. replace the clutch switch. it really easy. the part costs around 25 bucks, and 30 mins of labor (for novice with common sense).
Reply
Old May 2, 2002 | 04:11 PM
  #4  
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 116
Likes: 0
From: Newark, NY, USA
Question just curious...

If the idle drops when the clutch is depressed, why does the engine care?... if anything i'd expect an idle increase with less load there.
Is there some RPM monitoring stuff in the transmission that feeds back to the engine computer? or is it an engine load compensation that throws off the fuel mix?

Just odd, trying to figure out all the systems mazda uses in the RX.

Dave Stephens
84 GSL-SE, in need of replacement
Reply
Old May 2, 2002 | 04:15 PM
  #5  
WhiteRXseven's Avatar
Banned. I got OWNED!!!
 
Joined: Apr 2002
Posts: 705
Likes: 0
From: Maryland
If I remember correctly....
My car did that before....

Was a signal that your CLUTCH is going out.

Roll along in 5th gear and punch it..

See if yoru clutch is slipping...

after you get clutch fixed, problem probably
will go away...
Reply
Old May 4, 2002 | 02:35 PM
  #6  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 73
Likes: 0
From: Minneapolis
Wink Thanks

Thanks guys, I think it is my clutch switch. I am going to fix that, and get a pic of my 7 on the board.

And I think my clutch is bad, I will see what happens after I replace the clutch, thanks
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:39 PM.