3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

help OVERHEATING

Thread Tools
 
Search this Thread
 
Old 10-17-06, 05:41 PM
  #1  
Full Member

Thread Starter
 
scooty211's Avatar
 
Join Date: Oct 2004
Location: ohio
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
help OVERHEATING

lets see its about 50 degrees out and my car is still over heating. i have installed
new thermostat
koyo radiator.

there is no leaks visable. the car smokes alot (i do know my oil seal is leaking on the twins) even after the car is warm. im starting to think its my water seals. can anyone else think of any thing else ???

thanks
Old 10-17-06, 06:19 PM
  #2  
Time or Money, Pick one

iTrader: (37)
 
silverTRD's Avatar
 
Join Date: Oct 2005
Location: Torrance, ca.
Posts: 3,353
Received 154 Likes on 125 Posts
was it a new install on the koyo? if so, did you burp the upper radiator hose?
Old 10-17-06, 06:49 PM
  #3  
Full Member

Thread Starter
 
scooty211's Avatar
 
Join Date: Oct 2004
Location: ohio
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
there is water in the upper rad hose and this started before koyo. when i take off the rad cap water bubbles out... not ruling out a air pocket in the system but the white smoke scares me
Old 10-17-06, 10:01 PM
  #4  
Rx-hippie

iTrader: (1)
 
trainwreck517's Avatar
 
Join Date: Sep 2003
Location: Torrance CA
Posts: 2,076
Likes: 0
Received 0 Likes on 0 Posts
Once the engine is cold, take off the water pump housing filler cap, start the car, look at the the filler neck.. if yo get a big gushing, alot of air bumbles like champain or soda,... then its mostlikey your coolant seals..

Is the smoke blue? Or white? If white.. then most likely coolant. Does it smell sweet? If so.. defenitily coolant.

hope that helps.
Old 10-17-06, 10:04 PM
  #5  
needs more track time

iTrader: (16)
 
gracer7-rx7's Avatar
 
Join Date: Mar 2006
Location: Bay Area CA
Posts: 9,192
Received 510 Likes on 351 Posts
Originally Posted by scooty211
there is water in the upper rad hose and this started before koyo. when i take off the rad cap water bubbles out... not ruling out a air pocket in the system but the white smoke scares me
Keep bleeding. Search for Lisle for a good cheap tool to bleed the air out of the system or go to the FAQ and follow the links there. The presense of water in the upper rad hose doesn't mean there isn't air in the system.
Old 10-18-06, 10:32 AM
  #6  
Derwin

iTrader: (2)
 
dradon03's Avatar
 
Join Date: Apr 2005
Location: MTL, QC
Posts: 2,888
Likes: 0
Received 0 Likes on 0 Posts
When you filled up did you pre mix the Prestone of did you just add water after having addedd your Prestone if you how long has it been?did it sit? Could there have been any corosion? Anything that would make your waterseals go?

Alex
Old 10-18-06, 10:37 AM
  #7  
el unico

 
gafu mazda's Avatar
 
Join Date: May 2006
Location: South Jersey
Posts: 370
Likes: 0
Received 0 Likes on 0 Posts
stupid but a suggestion....are your fans turning on?
Old 10-19-06, 08:29 AM
  #8  
Full Member

Thread Starter
 
scooty211's Avatar
 
Join Date: Oct 2004
Location: ohio
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
trianwreck - thats what the coolent does when i take off the cap and yes the smoke is white.

I just picked up a lisle today and see what happens this weekend . Yes i have 2 spral fans that do turn on.

thanks for the help guys
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JoesFC
2nd Generation Specific (1986-1992)
9
10-05-15 08:10 AM
Devon Murray
Introduce yourself
2
09-25-15 09:41 AM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
erevos
2nd Generation Specific (1986-1992)
4
09-15-15 09:19 AM



Quick Reply: help OVERHEATING



All times are GMT -5. The time now is 03:02 PM.