Hey i bought the r1 dual oil coolers and its missing the long line to the passenger side... I was wondering what my options are now? i tried looking through the mazda racing discount? but the part number wasnt coming up. So i dont believe i have an option to replace the stock one?

the only there solution i can think of is cut the end off of the hardline, weld a lip around it and just clamp a hose over that, and have it connecting to one of those fittings that the aftermarket kits come with?

any suggestions/ recommendation?

 

Buy a used one or get one from Ray, it's in the parts manual.

 

Push lock line and fittings.

 

-10 an

 

Yup

Yup again

 

+1

 

push and lock for the whole line or cut the connection off and weld a lip?

 

the entire line..

22 MM X1.5 to -8 fittings x 2 -- 11.00 each
90* -8 Push lock fittings x 2 -- 19.00 each
piece of -8 push lock hose -- depends were you get it from

you can get everything from pegasus

 

You mean this line?


Small fabricated brackets:

 

Benny, tell me exactly what you need (length, hose spec, fitting and fitting thread pitch, etc.)

And I will make it for you & ship it to you.

I have one of the largest industrial hose & fluid transmission facilities in the United States, at my disposal.

 

if im seeing this correctly, no. looks like thats dr side cooler to pass side cooler... i need pass side cooler to engine..

no way! i will definitely send you a pm once i get back home and measure it out

 

ah, the other line that goes to the passenger side can't help you out with exact lengths and fittings as I don't have that line on my car. Check out Dr. Turbo's old car, I think it's Alex Rodriguez's car now, he ran AN line for all the oil hoses.

 

18MM X 1.5 to -8AN - one
150* -8 push lock - one
22MM X 1.5 to -8AN - one
45* -8 push lock - one
About 4 feet of -8 push lock hose depending on how you route it.
Pegasus has everything you need