Help: missing long line for dual oil coolers, what are my options?
Hey i bought the r1 dual oil coolers and its missing the long line to the passenger side... I was wondering what my options are now? i tried looking through the mazda racing discount? but the part number wasnt coming up. So i dont believe i have an option to replace the stock one?
the only there solution i can think of is cut the end off of the hardline, weld a lip around it and just clamp a hose over that, and have it connecting to one of those fittings that the aftermarket kits come with? any suggestions/ recommendation? |
Originally Posted by muibubbles
(Post 10690768)
Hey i bought the r1 dual oil coolers and its missing the long line to the passenger side... I was wondering what my options are now? i tried looking through the mazda racing discount? but the part number wasnt coming up. So i dont believe i have an option to replace the stock one?
the only there solution i can think of is cut the end off of the hardline, weld a lip around it and just clamp a hose over that, and have it connecting to one of those fittings that the aftermarket kits come with? any suggestions/ recommendation? |
Push lock line and fittings.
|
-10 an
|
Originally Posted by jm93rx7
(Post 10691139)
Push lock line and fittings.
Originally Posted by Chudsoncoupe
(Post 10691147)
-10 an
|
Originally Posted by twinsinside
(Post 10690838)
buy a used one or get one from ray, it's in the parts manual.
|
push and lock for the whole line or cut the connection off and weld a lip?
|
Originally Posted by muibubbles
(Post 10691426)
push and lock for the whole line or cut the connection off and weld a lip?
22 MM X1.5 to -8 fittings x 2 -- 11.00 each 90* -8 Push lock fittings x 2 -- 19.00 each piece of -8 push lock hose -- depends were you get it from you can get everything from pegasus |
You mean this line?
http://i211.photobucket.com/albums/b...D/LS1FD131.jpg Small fabricated brackets: http://i211.photobucket.com/albums/b...D/LS1FD147.jpg |
Benny, tell me exactly what you need (length, hose spec, fitting and fitting thread pitch, etc.)
And I will make it for you & ship it to you. I have one of the largest industrial hose & fluid transmission facilities in the United States, at my disposal. |
Originally Posted by Brent Dalton
(Post 10691728)
You mean this line?
http://i211.photobucket.com/albums/b...D/LS1FD131.jpg Small fabricated brackets: http://i211.photobucket.com/albums/b...D/LS1FD147.jpg
Originally Posted by Prometheus
(Post 10691762)
Benny, tell me exactly what you need (length, hose spec, fitting and fitting thread pitch, etc.)
And I will make it for you & ship it to you. I have one of the largest industrial hose & fluid transmission facilities in the United States, at my disposal. |
ah, the other line that goes to the passenger side :) can't help you out with exact lengths and fittings as I don't have that line on my car. Check out Dr. Turbo's old car, I think it's Alex Rodriguez's car now, he ran AN line for all the oil hoses.
|
18MM X 1.5 to -8AN - one
150* -8 push lock - one 22MM X 1.5 to -8AN - one 45* -8 push lock - one About 4 feet of -8 push lock hose depending on how you route it. Pegasus has everything you need |
All times are GMT -5. The time now is 01:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands