Ok so i am installing fd motor into e30 bmw.
the engine purchased by the owner along with manual trans.
so i dont really know what mods already on the engine so far
But i can tell that the turbo is single now. They blocked all the vacuum lines.
intake manifold already aftermarket with the blocked off egr and also single throttle body
air pump deleted with petit kit
And i dont see any oil cooler. With it.
The lines are already customed by fitting banjo bolt and lines back straight into the bottom part of front housing of the engine
which i believe there some parts from the stock fd3s that goes to original oil cooler

My question is. Can someone point me or help me with pictures for the stock engine look like. I want to know what parts that lost in my engine
also if you guys have the mods engines pictures but with proper way to still drive on the street.
what to keep what to mods.

Thanks so much.

 

Welcome to the 'doritos' Builds. It's such a "packed" engine I double any stock engine pics will suffice for what you're looking for. In case I'm wrong again, here's a decent stock 13B-REW (sans turbos) engine / tranny pic...

 

Thanks sir.. thats pretty damn beauty.
In your opinion what aspect need to mods and keep.