Can anyone confirm with me how to install this.

I understand it that I have to splice the wires into the input wires for the primary coil. Ie.. between the ignitor and the coil.
Looks like I would unfasten the clipped harness from the coil.
Cut the wires. Splice the red and orange from the Hi6 to the wires on the coil side. Then splice the red and white from the Hi6 to the end of the cut wire that leads to the ignitor.
Then hook up the power and the ground wires and put it all back together..

Is that about right?
A picture is worth a thousand words if anyone could oblidge me?


Thanks for any input.

 

lmfao. You know why I'm laughing Dave.