help locating knock sensor wire
#1
help locating knock sensor wire
After getting my car back from the shop I noticed a single loose black wire loose from the area under the elbow to the left of the ignition coil.
The wire is connected a sensor on the block,but I cant see where to reconnect it on the other end. I,m assuming its the knock sensor because there are no readings on the PFC.
The single connector itself looks like it was attached to the wiring loom with a plastic circular clip.
Can anyone tell me where to find where to reconnect it?
thanks.
The wire is connected a sensor on the block,but I cant see where to reconnect it on the other end. I,m assuming its the knock sensor because there are no readings on the PFC.
The single connector itself looks like it was attached to the wiring loom with a plastic circular clip.
Can anyone tell me where to find where to reconnect it?
thanks.
#2
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
If it is the knock sensor wire you can find it's mate in the area of the vaccum chamber, on the side of the hoses. It may be taped to the main harness to keep it from floating around. Kinda hard to see. You will probably have to take a few things off to get to it.(Maybe the elbow, possibly loosen the power steering pump. I'll see if i have any pics of it and e-mail them to you if you need? Hope this helped!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM