existanzrx7

iTrader: (8)

Is there any special steps in installing or taking off a main pulley? I have a Pettit main pulley that I’m trying to install.

chinaman

Remove the belts, the 4 bolts holding the pulley and remove.

IRPerformance

iTrader: (41)

Actually leave the belt on and tight. If you don't have air tools it will help keep the pulley from spinning. Remove the four 10mm bolts. They shouldn't be on too tight. Another option is to use a strap wrench to hold the pulley while you crack them loose. DO NOT remove the e-shaft bolt. There is no reason to with tht type of pulley and you could cause motor damage.

existanzrx7

iTrader: (8)

Thanks guys for the help. Also one more thing with me removing the main pulley won’t mess up the timing and also I wont have to set the engine back into timing would I?

Brent 94

iTrader: (1)

No, not to my knowledge that is. I don't see why you would in any case.

chinaman

This is one of the many good things I like about a rotary. You don't have to worry about timing issues! Not a piston motor!

cewrx7r1

iTrader: (2)

Dapdas