3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help !!!Down pipe troubles

Thread Tools
 
Search this Thread
 
Old Feb 26, 2003 | 10:22 AM
  #1  
whiteracer1's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Sep 2002
Posts: 201
Likes: 4
From: Pensacola, Florida
Help !!!Down pipe troubles

I recently had a down pipe put pn my 94 fd, but unfortunately one of the bolt that holds the factory pipe broke. The new pipe is one, but i only have three nuts and bolts holding it on. I thinks it is already starting to come loose because i hear a rattle when i start the car and some exhaust is coming out of the downpipe into the engine bay. What do i need to do and what part do i need to buy Please help!!!!


Also, I am getting a whitish smoke from my car when i start it up it i have not driven it in a while, is that a coolant leak? I need help here too. THanks for any support that you can give me.
Reply
Old Feb 26, 2003 | 10:34 AM
  #2  
LAracer's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jul 2002
Posts: 592
Likes: 0
From: Los Alamos, NM
There is info on this thread that will help you:

http://www.nopistons.com/forums/inde...&f=10&t=12254&
Reply
Old Feb 26, 2003 | 10:54 AM
  #3  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
So you thought it would be OK to bolt up the downpipe using 3 bolts?? Take your car to a competent mechanic. He will probably tell you that the turbos will have to come off to repair the broken bolt. Be prepared to pay at least $400.
Reply
Old Feb 26, 2003 | 12:25 PM
  #4  
whiteracer1's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Sep 2002
Posts: 201
Likes: 4
From: Pensacola, Florida
well.............. i new it would niot last long but i did not have the money to get it fixed properly........i have not really been driving the car. My mechanic told the same thing.but i just wanted another opinion..
Reply
Old Feb 26, 2003 | 12:45 PM
  #5  
whiteracer1's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Sep 2002
Posts: 201
Likes: 4
From: Pensacola, Florida
Why did my car blow whitish smoke when i first started.............before i touched the down pipe....... what kind of leak is happening......what do i need to do or look at.......is a coolant related?
Reply
Old Feb 26, 2003 | 01:11 PM
  #6  
aReX-7's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (3)
 
Joined: Aug 2001
Posts: 571
Likes: 0
From: Medford, OR
Smoke or Steam?

White or smoke is usually turbo related. A little bit of steam on start up is very common. A ton of steam on start up may be cause for concern. Does this "smoke" smell sweet, like coolant? Does your car use coolant? If it does, there is your answer.

Jeff
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
vy_MR2
1st Generation Specific (1979-1985)
0
Sep 16, 2015 06:39 AM
yetter227
2nd Generation Specific (1986-1992)
20
Sep 5, 2015 11:57 PM




All times are GMT -5. The time now is 05:10 AM.