Help boost issue!! even after vaccume hose job!!
#1
92' JDM Type R
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: Vernon BC/Winnipeg MB Canada
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Help boost issue!! even after vaccume hose job!!
Hey guys, I was hopeing you could shine some light on this, heres the facts about my car:
-My car sat for a good while before I bought it
-No boost at all, under any RPM.... I cant go past about 4500rpm, it just boggs
-back firing like crazy
-I did the vaccume hose job, and every hose was good, I even replaced 2 seliniods
-the boost gauge i have will show negative pressure, but will never go above -1 or 0
-boost gauge is plugged in to the proper nipple on the UIM
Thanks,
Jeff
-My car sat for a good while before I bought it
-No boost at all, under any RPM.... I cant go past about 4500rpm, it just boggs
-back firing like crazy
-I did the vaccume hose job, and every hose was good, I even replaced 2 seliniods
-the boost gauge i have will show negative pressure, but will never go above -1 or 0
-boost gauge is plugged in to the proper nipple on the UIM
Thanks,
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM