3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Headlights,Right Turn Signals,Hazards Not working?

Old Mar 8, 2007 | 03:38 AM
  #1  
LasVegasGS's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Vegas
Headlights,Right Turn Signals,Hazards Not working?

Hey guys I've been fighting electrial bugs like no other this past week. Now that I fixed my Room fuse that kept poping now.


My Headlights wont turn on is there some kind of fuse or Relay for them that coulda went bad?

Then when I turn my turn signals on to the Left everything works fine. When I turn them to the right It clicks normally but noting lights up.

When I turn my Hazards on noting lights up & it also clicks fast like I have a blown bulb.


PS my driving lights the ones that are one click before the headlights dont work on either.

I can turn on my high beams if I press the stick forward but thats about it. So I guess that cancels the Multi Switch.
Any help will help

thanks.

Last edited by LasVegasGS; Mar 8, 2007 at 04:02 AM.
Reply
Old Mar 8, 2007 | 03:55 AM
  #2  
XxMerlinxX's Avatar
Team Benjos Captain
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Aug 2005
Posts: 2,720
Likes: 1
From: Greenwood/Hartsville, SC.
Go through the fuse boxes again, definitely sounds like one has blown.
Reply
Old Mar 8, 2007 | 09:29 PM
  #3  
LasVegasGS's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Vegas
Anyone where is the headlight fuse?
Reply
Old Mar 9, 2007 | 12:11 AM
  #4  
themcneal's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 612
Likes: 1
From: Bellevue, WA
There is a 30A headlight fuse in the main fuse block next to the battery and it's labelled as "HEAD" on the cover.

NOTE: All exterior lighting issues are in the workshop manual starting in Section E if you have it.

Mike
Reply
Old Mar 9, 2007 | 03:40 AM
  #5  
LasVegasGS's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Vegas
I do I was looking at wireing diagram but the body electrical just opened up a whole new world of help
Reply
Old Mar 9, 2007 | 08:42 AM
  #6  
themcneal's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 612
Likes: 1
From: Bellevue, WA
Page E-9 in the manual provides a symptom list for lighting issues and what page(s) to look on for a number of common symptoms.
Reply
Old Mar 9, 2007 | 08:43 AM
  #7  
airborne's Avatar
King of the Duct Tape
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 1,177
Likes: 0
From: PA
For something quick to check: look under your wheel wells. It's possible something rubbed through the harness there.
Reply
Old Mar 9, 2007 | 11:06 AM
  #8  
themcneal's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 612
Likes: 1
From: Bellevue, WA
This would be the front driver's side wheel well to check for rubbing through the harness.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:44 AM.