Air and Coolant temp on power fc
Air and Coolant temp on power fc
I have heard that the coolant guage is not very reliable in the fd but i have a power fc and was wondering what temp should the air be and also the water temp i think i might be running kind of hot but not quite sure just put a single in and want to make sure its not running overly hot and me having to rebuild or find another turbo to replace. thanks
everyone syas their run between 88-94C. mine runs between 93-99C. But it also depends which intercooler you have. I have a Greddy 2 row FMIC that blocks the **** out of my radiator.
My water temps never get above 86 degree celcuis when I'm driving or stopped. I do have the fans coming on sooner though. My charge temps are around 30-36 degree c during the day and 24-28 degree c at night. I'm also running a fluidyne rad and a blitz fmic.
R.K.
R.K.
Joined: Mar 2001
Posts: 30,804
Likes: 646
From: FL-->NJ/NYC again!
Coolant temps around 83-88, but I deleted my a/c, which made a huge diff. Also running an ASP race SMIC.
Air temps, once the car is warmed up, typically in the 30s for street driving. Anything above 60 or so and I'd say you have a problem. At a certain point the pfc will compensate and (i believe) retard the timing to save the motor. With high AITs, definitely not smart to beat on the car.
Air temps, once the car is warmed up, typically in the 30s for street driving. Anything above 60 or so and I'd say you have a problem. At a certain point the pfc will compensate and (i believe) retard the timing to save the motor. With high AITs, definitely not smart to beat on the car.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM






