3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Headlights,Right Turn Signals,Hazards Not working?

Thread Tools
 
Search this Thread
 
Old Mar 8, 2007 | 03:38 AM
  #1  
LasVegasGS's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Vegas
Headlights,Right Turn Signals,Hazards Not working?

Hey guys I've been fighting electrial bugs like no other this past week. Now that I fixed my Room fuse that kept poping now.


My Headlights wont turn on is there some kind of fuse or Relay for them that coulda went bad?

Then when I turn my turn signals on to the Left everything works fine. When I turn them to the right It clicks normally but noting lights up.

When I turn my Hazards on noting lights up & it also clicks fast like I have a blown bulb.


PS my driving lights the ones that are one click before the headlights dont work on either.

I can turn on my high beams if I press the stick forward but thats about it. So I guess that cancels the Multi Switch.
Any help will help

thanks.

Last edited by LasVegasGS; Mar 8, 2007 at 04:02 AM.
Reply
Old Mar 8, 2007 | 03:55 AM
  #2  
XxMerlinxX's Avatar
Team Benjos Captain
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Aug 2005
Posts: 2,720
Likes: 1
From: Greenwood/Hartsville, SC.
Go through the fuse boxes again, definitely sounds like one has blown.
Reply
Old Mar 8, 2007 | 09:29 PM
  #3  
LasVegasGS's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Vegas
Anyone where is the headlight fuse?
Reply
Old Mar 9, 2007 | 12:11 AM
  #4  
themcneal's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 612
Likes: 1
From: Bellevue, WA
There is a 30A headlight fuse in the main fuse block next to the battery and it's labelled as "HEAD" on the cover.

NOTE: All exterior lighting issues are in the workshop manual starting in Section E if you have it.

Mike
Reply
Old Mar 9, 2007 | 03:40 AM
  #5  
LasVegasGS's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Vegas
I do I was looking at wireing diagram but the body electrical just opened up a whole new world of help
Reply
Old Mar 9, 2007 | 08:42 AM
  #6  
themcneal's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 612
Likes: 1
From: Bellevue, WA
Page E-9 in the manual provides a symptom list for lighting issues and what page(s) to look on for a number of common symptoms.
Reply
Old Mar 9, 2007 | 08:43 AM
  #7  
airborne's Avatar
King of the Duct Tape
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 1,177
Likes: 0
From: PA
For something quick to check: look under your wheel wells. It's possible something rubbed through the harness there.
Reply
Old Mar 9, 2007 | 11:06 AM
  #8  
themcneal's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 612
Likes: 1
From: Bellevue, WA
This would be the front driver's side wheel well to check for rubbing through the harness.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post




All times are GMT -5. The time now is 06:06 PM.