3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Headlight conversion peices?

Old Mar 15, 2009 | 11:13 AM
  #1  
rXzach93fd's Avatar
Thread Starter
RB Power!
Tenured Member: 15 Years
iTrader: (1)
 
Joined: Apr 2007
Posts: 314
Likes: 0
From: Belleville, IL
Headlight conversion peices?

Is there a place to buy the plastic peices that surround the lights and the lens covers seperately for the re conversion. I couldn't find anything when I searched. Any help would be appreciated. Thanks

this is all I have, just the lights themself

Reply
Old Mar 15, 2009 | 11:16 AM
  #2  
Newbie
Tenured Member: 20 Years
iTrader: (9)
 
Joined: Feb 2002
Posts: 1,171
Likes: 0
From: MI
ebay, there is a business on there that sells just the buckets, I don't think they come with lenses though.
Reply
Old Mar 15, 2009 | 11:29 AM
  #3  
yourmom23's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2008
Posts: 588
Likes: 0
From: Montana
rhdjapan has a bunch of different ones but they are expensive as hell
Reply
Old Mar 15, 2009 | 12:01 PM
  #4  
badddrx7's Avatar
All Spooled Up
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2001
Posts: 2,752
Likes: 3
From: Ironton,ohio
Raceonusa have them




Later
Reply
Old Mar 15, 2009 | 08:14 PM
  #5  
rXzach93fd's Avatar
Thread Starter
RB Power!
Tenured Member: 15 Years
iTrader: (1)
 
Joined: Apr 2007
Posts: 314
Likes: 0
From: Belleville, IL
thanks guys, I checked out raceoneusa and I don't see where you can get them seperate
Reply
Old Mar 15, 2009 | 08:18 PM
  #6  
Mytelex22's Avatar
Senior Member
Tenured Member: 20 Years
Liked
iTrader: (11)
 
Joined: Jan 2006
Posts: 524
Likes: 1
From: Miami
Not trying to threadjack, but would you happen to have a write up on that swap?
Reply
Old Mar 16, 2009 | 12:18 AM
  #7  
rXzach93fd's Avatar
Thread Starter
RB Power!
Tenured Member: 15 Years
iTrader: (1)
 
Joined: Apr 2007
Posts: 314
Likes: 0
From: Belleville, IL
there is one on here somewhere if you search hard enough, all you have to do is put the lights up and mark where you need to cut. The wiring is easy too, basically 3 wires for each side(high beam, low beam, and your grounds togeather).
Reply
Old Mar 16, 2009 | 05:49 PM
  #8  
Mytelex22's Avatar
Senior Member
Tenured Member: 20 Years
Liked
iTrader: (11)
 
Joined: Jan 2006
Posts: 524
Likes: 1
From: Miami
Originally Posted by rXzach93fd
there is one on here somewhere if you search hard enough, all you have to do is put the lights up and mark where you need to cut. The wiring is easy too, basically 3 wires for each side(high beam, low beam, and your grounds togeather).

Sorry, I meant the engine swap...
Reply
Old Mar 16, 2009 | 06:46 PM
  #9  
Newbie
Tenured Member: 20 Years
iTrader: (9)
 
Joined: Feb 2002
Posts: 1,171
Likes: 0
From: MI
Originally Posted by Mytelex22
Sorry, I meant the engine swap...
Writeup:

1) Sell RX7
2) Go buy a Nissan...


/writeup
Reply
Old Mar 16, 2009 | 07:48 PM
  #10  
Mytelex22's Avatar
Senior Member
Tenured Member: 20 Years
Liked
iTrader: (11)
 
Joined: Jan 2006
Posts: 524
Likes: 1
From: Miami
Originally Posted by JHew84
Writeup:

1) Sell RX7
2) Go buy a Nissan...


/writeup

Very informative, good thing I wasn't asking you...
Reply
Old Mar 16, 2009 | 07:56 PM
  #11  
rXzach93fd's Avatar
Thread Starter
RB Power!
Tenured Member: 15 Years
iTrader: (1)
 
Joined: Apr 2007
Posts: 314
Likes: 0
From: Belleville, IL
no lol I don't have a write up, If you want a piston engine I would strongly recommend just buying an ls1 and the premade kit to put in in. It will save you time , money, weight. I wish I would have gone that route...
Reply
Old Mar 16, 2009 | 08:05 PM
  #12  
Mytelex22's Avatar
Senior Member
Tenured Member: 20 Years
Liked
iTrader: (11)
 
Joined: Jan 2006
Posts: 524
Likes: 1
From: Miami
I was just thinking about a future project for another FD... I don't want to go LS1 nor 2JZ... It's been a split between NA 3-rotor, or an SR motor. Hell, I wish I could squeeze an MZR motor (Mazdaspeed 3) in that badboy ... Thanks anyways...


Tony
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
Oct 3, 2015 01:08 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:43 AM.