Headlight conversion peices?
 

Is there a place to buy the plastic peices that surround the lights and the lens covers seperately for the re conversion. I couldn't find anything when I searched. Any help would be appreciated. Thanks

this is all I have, just the lights themself

http://i134.photobucket.com/albums/q...9/GEDC2944.jpg

ebay, there is a business on there that sells just the buckets, I don't think they come with lenses though.

rhdjapan has a bunch of different ones but they are expensive as hell

Raceonusa have them




Later

thanks guys, I checked out raceoneusa and I don't see where you can get them seperate

Not trying to threadjack, but would you happen to have a write up on that swap? :D

there is one on here somewhere if you search hard enough, all you have to do is put the lights up and mark where you need to cut. The wiring is easy too, basically 3 wires for each side(high beam, low beam, and your grounds togeather).

Sorry, I meant the engine swap... :evilgrin:

Writeup:

1) Sell RX7
2) Go buy a Nissan...


/writeup

Very informative, good thing I wasn't asking you... :icon_no2:

no lol I don't have a write up, If you want a piston engine I would strongly recommend just buying an ls1 and the premade kit to put in in. It will save you time , money, weight. I wish I would have gone that route...

I was just thinking about a future project for another FD... I don't want to go LS1 nor 2JZ... It's been a split between NA 3-rotor, or an SR motor. Hell, I wish I could squeeze an MZR motor (Mazdaspeed 3) in that badboy :D... Thanks anyways...


Tony