DeaconFrost

I was wondering if anyone had any tips or tricks on how to change/replace the headlight bulb on a 94 rx7 tt. Or do I just have to take the whole thing apart?

Thanks in advance.

BicuspiD

HID Install

I did a step by step HID upgrade for the FD - the light bulb is in the same place, just ignore all the ballast and prelocating info - take the covers off and go right to the blb install - should work out for you that way and give you some pics along the way

WaLieN

Nice how-to! Im confused on step one, though... does the top painted part just slide off?

tester1977

(Based on memory) Once the screws to the head light cover is removed it comes apart real easily. Check the owners manual. It has the whole procedure step by step.

BicuspiD

there are 4 screws holfding the painted cover on. you have to loosen two of them when the lights are down ( the rear) then on the front there are two more screws accessible when the light is raised ( NOT the bezel screws)

911GT2

BicuspiD: how much was that kit? It looks like good quality stuff, I might do that soon.

911GT2

nevermind, checked the site. $499 for all who care.

Zoomspeed

it gives you steps and everythign in the owners manual