imitek

Not posted in a long time any ideas on part numbers or where to get from or any alternative blanks etc

The rear hatch loom comes from body threw the worm rubber then into hatch the clip that connects the rubber to hatch is that part I'm after the snap clip has broken the number on the back of it is ge1831 but doesn't seem to cross over to anything any help would be great thanks

DaleClark

iTrader: (55)

Do you have a picture of what you are looking for? No idea what you are describing.

Dale

imitek

This is inside of the flexi rubber that goes from the hatch to the body
If that helps

imitek

This is the plastic clip I need

This is the flexi rubber that the clip sits inside

Sgtblue

iTrader: (16)

Your best bet might be the local U-Pull-it type salvage yard. I’m guessing those aren’t unique to the FD and are probably the same on any 90’s era MAZDA hatchback. You might also check in the Domestic/Ford sections for 2nd Gen Ford Probes. They were manufactured by MAZDA and share a host of different little things like that.

DaleClark

iTrader: (55)

Did a quick dig through the parts diagram and that doesn't seem to be available as a part. Best is to hit up @tomsn16 or someone with a lot of parts to see if you can get that harness with that clip.

Dale

imitek

Found the actual part number from Mazda f10067ch1, I can't find anything on Google Google, and part no longer available from Mazda, was told it was £1.90 lol

If anyone interested parcel shelf large round clips that hold the rear hatch trim in place
Part number and still available from Mazda fd01-68-301-02

anyway back to the plastic clip needed
such an odd size inner hole size of hatch is 18mm x 40mm

​​​​​
​​​​

​​​
​​​




​​

imitek

So after more hunting my friend decided to make and print for me they fit better than stock