hanger on right side of RB duals?
#1
fd-withdrawal
Thread Starter
Join Date: Jun 2001
Location: Canada
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
hanger on right side of RB duals?
hey guys,
just installed my RB dual today, however on the right side of the muffler, there's a plate there that's suppose to attach on to "a chasis retainer."
i dont have this? any of you other guys with the RB have this problem? do you guys just cut it off?
thanks!
just installed my RB dual today, however on the right side of the muffler, there's a plate there that's suppose to attach on to "a chasis retainer."
i dont have this? any of you other guys with the RB have this problem? do you guys just cut it off?
thanks!
#5
no more problems, PLEASE!
Join Date: Jan 2003
Location: Bay Area, CA
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
i had the same 'problem'. then i looked at my stock exhaust and said maybe i could use the hanger from that. and what did i see but that the hanger was bolted on and not welded on.
un bolt the hanger, stick the rod in the rubber hanger and bolt it to the brackets on the racing beat. you should be set now...
un bolt the hanger, stick the rod in the rubber hanger and bolt it to the brackets on the racing beat. you should be set now...
Last edited by chiminoid; 05-11-04 at 10:08 PM.
#7
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone else find that bracket to be an eyesore? How noticeable is it when you are behind the car. It jumps out at me in the pics. And IMO is repulsive. Almost reason enough for me to cancel my order.
Trending Topics
#8
Urban Combat Vet
iTrader: (16)
Not sure, but a friend has a RB DT (which I really like over my Greddy SP) and I haven't noticed it on his. Maybe his is just hanging down more w/o the hanger attached. I'm thinking when it's bolted up properly, it's nearly out of sight.
Last edited by Sgtblue; 05-11-04 at 10:27 PM.
#10
yeah, apn, i put my bolts in the other direction and it keeps it a little cleaner. would be nice to get that hanger and the flange on the muffler powder coated a nice flat black so you don't see it as much, but still that's a lotta money for minimal impact.
#12
Eats, Sleeps, Dreams Rotary
Originally posted by apneablue
...but i keep wanting to flip those bolts and cut them...
...but i keep wanting to flip those bolts and cut them...
Originally posted by rynberg
apneablue, your bolts are in backward!
apneablue, your bolts are in backward!
Thread
Thread Starter
Forum
Replies
Last Post