Doing the Ver.6 GF-FD3S Swap on my RX7.
The ABS Unit is a 4 Channel Unit from Bosch. It's the Bosch 5.3 ABS with EBD. On the RX7 it uses only 3 ports, 2x Front and 1xRear Split into both wheels.

The lines diagram is attached below:



If anyone is interested in doing the swap, I would recommend getting the ABS Unit from the GF-FD3S ver.6 ( Vin: GF-FD3S-6xxxxx)

This ABS Unit has the ECU on board and is much easier to wire then any previous ABS Unit.

 

Although on my car I am just swapping the wiring from a 02 RX7 which makes the swap a lot simpler but before I purchased the wiring I had searched for all the wiring diagrams. Here is one which would be very helpful as it shows all the connections on the 5.3 Unit.