Im getting a BC tommorow and HAVE looked at other forums but I would like in some better intrustions on how to install it, anyone have some pictures of their install on the engine side im not sure how to do it with the twins on... any help would be GREAT.

Thanks

Clark Canfield

 

Here are a few links, hope this helps....
https://www.rx7club.com/forum/showthread.php?t=20750

 

https://www.rx7club.com/forum/showthread.php?t=192249

 

BTW, please tell me how the install goes, and how you tune it. I have not installed mine yet...

 

just got the spec2 anymore or detailed pic type threads around i plan to install tonight

 

dont worry guys...its a whole hell of a lot easier to do than you would think.

 

my Profec B II is still sitting here... havent had a chance to get to it yet Please come back and tell us how the install went....

 

Here's what I originally posted when I installed mine and I too noticed a severe lack of pics so I'll attach some.

I finished installing the Greddy Profec B spec ii boost controller, here's what I did:

*I ran the solenoid wiring from the engine bay through the drivers wheel well which brought it out behind the fuse box.

*I tapped the 12v source for the controller off the fuse box (circled in pic).

*I mounted the solenoid next to the ABS and ran the lines to the pressure source and wastegate.

*I then capped the lines to the stock boost solenoid.

*For the pressure source to the controller I T'ed the line for my boost guage.

*I then mounted the controller in the custom laser cut two tone (black/blue) din plate I had made and mounted that in the din.













If there's anything unclear, just ask and I'll see if I can remember what I did, or what needs to be done.

 

!!!!!!!!!!!swwweeeeeeeeeettttttt!!!!!!!!!

Thanks!!

 

installed mine today just need to power it up

 

SRA-fd3s... I am trying to PM you.... your pm box has exceeded it's limit...

please try emailing me.

David

 

I'm about to install this same boost controller and wanted to clear some things up. basically, i can use the little nipple on the UIM that people use for boost gauges as the pressure source right?

there is a nipple right? or am i imagining things (not currently looking at the car)

 

yes ur going to have to T it off to hook it up to a boost gauge and bc

 

i don't have a boost guage... was going to set the Profec's head unit on my steering column and use that as the read out since it has warnings etc. built in.

thank you very much for clearing that up for me.