Greddy Profec B II
#1
Size 14 Carbon Footprint
Thread Starter
Join Date: Oct 2006
Location: England
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Greddy Profec B II
Just purchased a used Greddy Profec B II. I received the basic parts, display unit ,valve and harnesses, no air filter or hose but that's not a problem.
I found the install notes on the Greddy website but can someone please just confirm that this controller is inserted in the wastegate control actuator line, and that the restrictor pill is left in the pipe ??
The rest looks straightforward.
many thanks
bob ( UK )
I found the install notes on the Greddy website but can someone please just confirm that this controller is inserted in the wastegate control actuator line, and that the restrictor pill is left in the pipe ??
The rest looks straightforward.
many thanks
bob ( UK )
#3
Size 14 Carbon Footprint
Thread Starter
Join Date: Oct 2006
Location: England
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Did I sense a touch of sarcasm in that response
I did search and found a few threads, but could not find the answer to the riddle of the restrictor pill. However I found the answer ( leave it in ) in an associated link to the post you gave me, so thanks again.
Bob
#4
I didn't read what was linked but think I have read most of the posts on this topic. You DO NOT leave the restrictor pill in the wastegate line. There are basically two ways to hook up the controller. One involves only the wastegate, the other involves the wastegate and prespool actuator. I prefer the second, but I understand both and theoretically they both should work. In the first, you do leave the pill in the prespool actuator line but not in the wastegate line. Hope this helps. . .
--Jeff
--Jeff
#5
sleeper
iTrader: (6)
like was said: the Restrictor pill gets removed!
here are some spec II settings since you will prob be asking here in the near future...
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/profec-b-spec-ii-settings-200113/
https://www.rx7club.com/showthread.p...profec+install
here are some spec II settings since you will prob be asking here in the near future...
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/profec-b-spec-ii-settings-200113/
https://www.rx7club.com/showthread.p...profec+install
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM