Does anyone have or know where I can get instructions on how to install a greddy front mount intercooler on a 94 rx7?

I know its a custom job, but I'm looking for either a general guideline of what kinds of things need to be done, or a diary of events that took place when you installed your intercooler. I've already experience the k&n filters being in the way of the intercooler piping.

 

Anyone? I need them too

 

Sorru to those that have been trying to reach me I am out of town and have not had internet connection. If you bought the front mont from me it should have come with instructions. I will be back on Thursday of this week and can find out why some of them were without instructions.

Jason

 

Yeah I got mine today from you Jason...No instructions...Everything was packed nicely.

Anyone out there have dirctions they can mail me?

There are so many parts to the kit I dont know if I can do it or not with out the directions

 

Hey Jason got mine Friday (Scott, from NH), I had not instuctions either. I got the general idea but I know that you have to do some trimmming and if I had some instructions that would be helpful. Thanks

 

Does anyone have directions? PM me if your willing to share them or fax them to me!!!

Thanks

 

HELP PLEASE!!!! IF you have the directions let me know.....

 

I have a set of insturctions for the old style front mount greddy. If people need them i can scan and post online for them. I am pretty sure this is not the same as the newer style one. but let me know and i can try and get them scanned.

James

 

Please scan them and post them. I got mine with no instructions

Thanks in advance

 

Yes please post them......Im waiting on directions from Jason......I need to install this IC today!!!!!

 

Come on guys help me out...

I called Jason (talked to Mike) 3 times about the directions but no luck getting them from him...yet....

Jason,
Please get back to me about the directions....Im in the middle of doing this over here...
thanks
Anthony

 

Rotary 93 I am also in the middle of my install. I have the front bumper off and radiator out and now waiting for instructions. Have you gotten any farther. I do not want to take out the A/C condenser until I know exactly where it goes. Do you have any help with this. I have enclosed a pic

 

Well this is where Im at:

I have the IC installed along with the bumper support (Just got done tonight)

Im just confused on:

1. How the A/C condensor lays and bolts up to..
2. Power steering cooler How and where does it mount...
3. Radiator How it gets supported and how do I put it in...

Their are plenty of other questions I had that would be answered if I had the damn directions....

Jason,

Are you working on this for us or what???

Havent heard back from you since I got the IC...

WHATS THE DEAL???

Please let us know...thanks
Anthony

 

how much cutting did you have to do on the reinforcement? I see you already have it mounted on the car. Did you already remove the A/C condenser?

 

Ill send you some pics if you give me your email address

 

Here is my email bcaffey630@aol.com

thanks

Brad

 

Ok guys I just talked to Jason....Hes faxing me the directions...

 

rotary93- when and if you get them could you post them or email them? That would be sweet! thanks

 

Jason faxed them to my office. He only sent me pages 13-22 because thats all I needed...

I dont have a fax here...Try calling Jason. He has a set of directions he faxed to me....

 

well, I have decided to go with a professional who has done it before. It seems that putting the intercooler and pipes on is easy, but depending on how your filters sit, you could have a problem. New intercooler pipes may need to be made to avoid the filters, and its easier to go with someone who can fashion pipes as needed on site, than to try ordering what you think you need. I also found that the radiator does need to be repositioned and braced as well as the condenser. this is a complete custom job, and no instructions come with the intercooler. I found a pro who has done it before and knows the pitfalls.

Important questions that I have learned to ask:

1: Have you installed a Greddy front mount on a 3gen before?
- instructions do not come with many Greddy front mounts, so they need to know what they are doing ahead of time. once the intercooler in mounted, there is the repositioning of the radiator and condenser that must be done. the pro will need to create new braces because they will no longer fit in the stock location.

2: (if keeping the stock front end) Will you need to do any cutting on the bumper to the intercooler fit?
- no cutting is necessary unless they have no idea what they are doing.

3: Can you fashion you own pipes if you need to on location?
- very important and likely to happen since the piping sent is not standard

4: How long will it take to finish?
- those who have done it before will take approx 5 hrs. that's not to say that if they take longer, they do not know what they are doing because the shop could just be busy, but you should definitly start keeping a close eye on things and asking questions.

5: Will you recharge the AC and fill the power steering fluid?
- these fluids may be spilled, and need to be replace by the spiller. it's only good business.

I'm still in the learning process, and as I discover more questions, I will post.

 

here are some pixs after the installation

 

one more

 

here is one of the condensor that is moved

 

Did anyone ever get their directions?? I am still waiting for mine, have called and emailed Jason several times and I am getting no response! Can anyone that has them email or fax them to me?? That would be much appreciated!! Thanks in advance, my email is spoir@aol.com

 

hey, someone emailed me telling me to do this... "Hey if you need directions on the install of this look on the other rx7 forum just add the s to the end of forum and then do a search for greddy instructions and you'll see it." Ahh, a sphinkter says what? What? Exactly! Where the hell to I go to do this, I am going crazy!! I have done a search on all forum and I don't see it!