On turboimport.com they are selling the Greddy 2 row FMIC for $899.95 one that will use the Greddy elbow, one that will use the stock piping. Now my question is, what is that compared to the M-spec or V-spec on rx7store.net? because they say they both require the Greddy elbow. thanks in advance.

http://turboimport.com/catalog/rx7.htm

andrew

.. maybe it's obvious, but I guess I'm just not seeing it..

 

It appears to be the v-spec. If you want to be sure I would ask them directly what core it is. If you want to know the difference b/t the v-spec vs. m-spec there is a HUGE thread on this. Personally I have the m-spec and see good intake temps.

 

900.00 is too expensive for a 2 row. you can get a very decent 3 row for around that price with power steering included. if you look around you can get the type-m and v-spec for around 400 with all accesories included.

 

where the hell are you getting these prices from? The guy wants a Greddy IC, not a XS Power IC.

 

http://www.rx7store.net/product_p/greddyfmicmspec.htm

They used to be just over $400, until they relized everyone was buying them over the more expensive v-spec, and jacked the prices up. You can pick them up used for about $450 if one pops up.

 

I'm aware of the M-spec, but where's he getting a V-Spec for $400? The V-Spec is a 2-row that costs $950.

Where's he getting any 3-row for under $1500? Unless it's just the IC w/o the piping, or it's used, he's not...

 

you just need to know where to look. buy right from the manufacturer. if you get an ic from rx7 store or wat not, the prices sometimes are unreal.

we are speaking of front mounts. prices are around 1300 or less. apexi, blitz, greddy...all respectable brands

v-mounts are another story