3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Got Coolant And Oil In My Intercooler Pipes what do i do??

Thread Tools
 
Search this Thread
 
Old Apr 13, 2002 | 09:30 PM
  #1  
Type RZ's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 107
Likes: 0
From: Atlanta, GA
Got Coolant And Oil In My Intercooler Pipes what do i do??

Got Coolant And Oil In My Intercooler Pipes what do i to get that crap out of it?? and I also installed my Koyo Racing Radiator and the intercooler duct wont fit anymore!!! anyone know how to remedy this??
Reply
Old Apr 13, 2002 | 09:59 PM
  #2  
GsrSol's Avatar
Z06 powered FD
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
Buy new turbos and don't drive the car. Oil is normal in the i/c pipes, just a thin coat, but coolant isn't ok!
Reply
Old Apr 13, 2002 | 10:18 PM
  #3  
Tim Benton's Avatar
FD title holder since 94
Tenured Member: 25 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Mar 2001
Posts: 4,203
Likes: 37
From: Cedartown, Ga
wow, coolant leaking from the turbos, thats one of the first I've heard. Did you have those rebuilt when they did the engine? Who did the work on them, if any, and who did the install work, maybe they screwed something up. Ours does have the water/coolant cooled center section, with oil on the bearings etc. as well.

Tim Benton
Reply
Old Apr 13, 2002 | 10:21 PM
  #4  
Tim Benton's Avatar
FD title holder since 94
Tenured Member: 25 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Mar 2001
Posts: 4,203
Likes: 37
From: Cedartown, Ga
the reason the IC duct doesn't fit anymore is because it was more than likely made for the stock radiator/fan setup. With the koyo being thicker than stock, the fans are now a tad higher-toward the IC duct. you can do 2 things, shim the fan shroud so that the fans sit lower (slow and not much fun) or bend the upper radiator brackets down some so that it, again, sits lower. I had to do that to mine to make room for the M2 duct.

Tim Benton
Reply
Old Apr 14, 2002 | 11:16 AM
  #5  
Type RZ's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 107
Likes: 0
From: Atlanta, GA
well i figured out why coolant was in the intercooler pipe, it was because my AST tank one of the little nipples broke off and the lower pipe on my intercooler poped off, so when my AST tank started spiting out coolant everywhere it must have gotten into the lower intercooler pipe.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snoopy FD
Build Threads
25
Dec 8, 2015 01:45 PM




All times are GMT -5. The time now is 06:11 PM.