Getting Ready for 7Stock Thread
#1
Turd Ferguson
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Location: Sherman Oaks, California
Posts: 2,047
Likes: 0
Received 1 Like
on
1 Post
Getting Ready for 7Stock Thread
Ok, the parts are mostly accumulated and I thought I'd do a little photo journal of me getting ready for this year's seven stock event in Irvine, California.
Today I put on the LIM, waterpump housing, fuel rails w/ 1300/550 injectors, fuel y-block, housing to w/p throttle bypass line, oil return line w/ -an fitting, rear oil block off and omp block off ... and then wrapped it all up in heat reflection tape.
Still lots to be done but day 1 was promising.
I'd like to open this up to others that are preparing and want to share the progress, also.
Today I put on the LIM, waterpump housing, fuel rails w/ 1300/550 injectors, fuel y-block, housing to w/p throttle bypass line, oil return line w/ -an fitting, rear oil block off and omp block off ... and then wrapped it all up in heat reflection tape.
Still lots to be done but day 1 was promising.
I'd like to open this up to others that are preparing and want to share the progress, also.
#5
Formerly widebodyseven
iTrader: (17)
Join Date: Jul 2009
Location: Garage
Posts: 1,799
Likes: 0
Received 0 Likes
on
0 Posts
So much to do so little time!
Beginning of the week
How it looks today, getting ready for paint
Cleaned up LIM, polished UIM and IC
Cleaned up oil coolers
Need to purchase OMP block off plates, emission block off plates, side mount alt. and electric water pump before i could put everything back together and build the engine harness.
Beginning of the week
How it looks today, getting ready for paint
Cleaned up LIM, polished UIM and IC
Cleaned up oil coolers
Need to purchase OMP block off plates, emission block off plates, side mount alt. and electric water pump before i could put everything back together and build the engine harness.
Trending Topics
#8
Eats, Sleeps, Dreams Rotary
iTrader: (52)
I know the excitement. Though I'm on the East coast, I was really hoping to have my GT35R setup done for the Chris Carlisi BBQ..... Didn't make it
Next year I will be there with bells on!
I envy you folks that are close to 7 Stock.... I would love to go one year.
Good luck fella's, looking good
Next year I will be there with bells on!
I envy you folks that are close to 7 Stock.... I would love to go one year.
Good luck fella's, looking good