Fyi...........
#1
Junior Member
Thread Starter
Join Date: Jun 2004
Location: N. CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Fyi...........
Well I finally got around to replacing my old Bose door speakers with new ones. While I had the passenger door panel off I decided I'd clean the contacts on the window switch. It was pretty corroded but was still working. After reassembling the switch and putting the panel back on, the window would not go up or down. I was sure I screwed something up in taking the switch apart. After a couple of hours of disassembling and reassembling the switch and trying to measure voltage I was stumped.
I couldn't even make it go up or down with the driver's side switch. It was then that I realized what a dumb *** I was...... the child safety switch on the driver's side was on!!
I only admit this so that no one else has to make this stupid mistake! Anyway, all is well now and I'll never make that mistake again!
I couldn't even make it go up or down with the driver's side switch. It was then that I realized what a dumb *** I was...... the child safety switch on the driver's side was on!!
I only admit this so that no one else has to make this stupid mistake! Anyway, all is well now and I'll never make that mistake again!
#7
Rotary Enthusiast
iTrader: (7)
I had my dash apart plugged in the cluster to see how the new lights looked. Took me a couple hour of sorting through the stupid wiring diagram before I realized I needed the dimmer switch plugged in. Too bad I figured it out. Any more time and I would have bit the bullet and ordered a race dash. It stupid stuff like that that makes projects take way too long.