Fuel pressure regulator.
10-28-06, 03:46 PM
#1
Senior Member
Thread Starter
Fuel pressure regulator.
I have a fuel pressure regulator the cost £65 make unknow but it was free to me and came off a mx5/miata.
My main question is would it be ok for my FD and would there be any benefits of puting it on.
I have a pressure gauge and sender spare as well so should i try hook it up as a fuel pressure gauge and would it work ?
My mods are fully decat including down pipe, HKS cold air filters, ARC smic intercooler, HKS F-con + GCC, full straight through exhaust, DEFI link water/oil temp, Boost gauge, Apexi AVC-R, Water temp controler, Double throtal removal, check valves replaces and rats nest vac lines replaced, Jap Import.
My main question is would it be ok for my FD and would there be any benefits of puting it on.
I have a pressure gauge and sender spare as well so should i try hook it up as a fuel pressure gauge and would it work ?
My mods are fully decat including down pipe, HKS cold air filters, ARC smic intercooler, HKS F-con + GCC, full straight through exhaust, DEFI link water/oil temp, Boost gauge, Apexi AVC-R, Water temp controler, Double throtal removal, check valves replaces and rats nest vac lines replaced, Jap Import.
10-28-06, 06:37 PM
#3
If you don't have any specs on it, don't use it as it could make things worse.
If you put a weaker FPR on your car, your fuel pump can overload it and then you'll have a tuning nightmare. If you know for sure that its stronger, then it won't any benefit unless you add a stronger fuel pump or unless its a Rising Rate FPR.
If you put a weaker FPR on your car, your fuel pump can overload it and then you'll have a tuning nightmare. If you know for sure that its stronger, then it won't any benefit unless you add a stronger fuel pump or unless its a Rising Rate FPR.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM